The purpose of this study is to develop an ultra-micro combustor that uses two types of coaxial cylindrical flames, rich premixed flame and diffusion flame. The combustor consists of inner and outer porous tubes, and rich propane-air mixture and air issued, respectively, through the inner tube outwardly and through the outer tube inwardly, forming a cylindrical stagnation plane sandwiched by the inner rich premixed flame and the outer diffusion flame. Petal type flame was also observed in the downstream of the cylindrical flames. Keeping the equivalence ratio φi and flow rate qi of the rich mixture constant, air flow rate qa was varied. The O2 and CO concentrations and temperature of the burnt gas were measured, and heat loss rate ηhl and c...
The micro power generation system is one of the potential solutions that provides better energy requ...
Micro-electro-mechanical systems (MEMS) occupy an important position in the national economy and mil...
Microturbines are small-scale gas turbine engines with a power range of 20 to 500 kW, typically used...
The purpose of this study is to develop an ultra-micro-combustor that uses two types of coaxial cyli...
Under micro-scale combustion influenced by quenching distance, high heat loss, shortened diffusion c...
This research compared the performance of a cylindrical mesoscale combustor against two planar mesos...
We have proposed two types of hydrogen-fueled microcombustors: one is for an Ultra Micro Gas Turbine...
A novel miniature cylindrical combustor, whose chamber wall is made of porous material, has been des...
The combustion characteristics of non-premixed hydrogen micro-jet flames in co-flow air were investi...
The flame stabilization limit on micro-combustor had studied to support the micro power generator sy...
For the development of ultra-micro combustors for Ultra-Micro Gas Turbines (UMGT), heat loss reducti...
In this study, effect of micro combustor geometry on combustion and emission behavior of premixed hy...
International audienceNowadays with the demand for high efficiency systems, there is growing develop...
International audienceThe need for high-density energy in the current growth of Miniaturization of E...
Miniature heat engines burning hydrogen and hydrocarbon fuels have significantly higher energy densi...
The micro power generation system is one of the potential solutions that provides better energy requ...
Micro-electro-mechanical systems (MEMS) occupy an important position in the national economy and mil...
Microturbines are small-scale gas turbine engines with a power range of 20 to 500 kW, typically used...
The purpose of this study is to develop an ultra-micro-combustor that uses two types of coaxial cyli...
Under micro-scale combustion influenced by quenching distance, high heat loss, shortened diffusion c...
This research compared the performance of a cylindrical mesoscale combustor against two planar mesos...
We have proposed two types of hydrogen-fueled microcombustors: one is for an Ultra Micro Gas Turbine...
A novel miniature cylindrical combustor, whose chamber wall is made of porous material, has been des...
The combustion characteristics of non-premixed hydrogen micro-jet flames in co-flow air were investi...
The flame stabilization limit on micro-combustor had studied to support the micro power generator sy...
For the development of ultra-micro combustors for Ultra-Micro Gas Turbines (UMGT), heat loss reducti...
In this study, effect of micro combustor geometry on combustion and emission behavior of premixed hy...
International audienceNowadays with the demand for high efficiency systems, there is growing develop...
International audienceThe need for high-density energy in the current growth of Miniaturization of E...
Miniature heat engines burning hydrogen and hydrocarbon fuels have significantly higher energy densi...
The micro power generation system is one of the potential solutions that provides better energy requ...
Micro-electro-mechanical systems (MEMS) occupy an important position in the national economy and mil...
Microturbines are small-scale gas turbine engines with a power range of 20 to 500 kW, typically used...