In flight stray light estimate for the Solar Orbiter/Metis coronagraph

After the 10th February 2020 launch (04:03 UTC), Solar Orbiter has recently begun its Nominal Mission Phase and is collecting imaging data as never seen before due to its peculiar orbit. The Metis coronagraph produces maps of the linearly polarized visible light corona in the wavelength band 580-640 nm and UV maps in the Lyman alpha H i 121.6 nm line. Metis is a coronagraph characterized by an innovative external occultation system that has a twofold function: reduce the thermal load and remove the diffraction due to the external occulter support. The positions of the entrance pupil (which is called Inverted External Occulter, IEO) and of the actual occulter are switched so that the pupil is the surface facing the solar disk and the occultation is performed by a spherical mirror, M0. M0 is positioned 800 mm behind IEO and reflects the disk light back through the IEO aperture. An Internal Occulter (IO) is conjugated to the IEO with respect to the primary mirror. IO is mounted on a motorized 2-axis stage that allows to perform in-flight fine adjustments to its position. During the on-ground calibration campaign the contribution of the stray light due to the diffraction from the IEO and scattering off the optics was measured. The measurement was carried out by using the OPSys facility in Torino (Italy), which is equipped with a clean environment and a source that simulates the solar disk divergence. A stray light measurement in flight is not trivial due to the presence of the solar corona. Nevertheless, an IO position optimization campaign has been conducted in order to reduce the stray light. A procedure was developed in order to minimize the stray light level on the instrument focal plane. This contribution reports on the procedure and on the results