Physical Model Tests of Concrete Buttress Dams with Failure Imposed by Hydrostatic Water Pressure

Although the failure of a concrete dam is a complex and highly dynamic process, the current safety assessments of concrete gravity and buttress dams rely on a simplified 2D stability analysis, which neglects the load redistribution due to 3D monolith interactions and the valley shape. In addition, the estimation of breach parameters in concrete dams is based on assumptions rather than analyses, and better prediction methods are needed. Model tests have been conducted to increase the understanding of the failure behavior of concrete dams. A scale model buttress dam, with a scale of 1:15, consisting of 5 monoliths that were 1.2 m in height and 4 m in width, was constructed and loaded to failure using water pressure. The model dam had detachable abutment supports and shear keys to permit variations in the 3D behavior. The results showed that the shear transfer was large between the monoliths and that the failure of a single dam monolith is unlikely. A greater lateral restraint gives not only a higher failure load but also a better indication of impending failure. These findings suggest that the entire dam, including its boundary conditions, should be considered during a stability assessment. The results also suggest that the common assumption in dam safety codes that a single monolith fails during flooding analysis is not conservative. The dataset obtained provides a foundation for the future development of dam-monitoring alarm limits and for predictive models of dam-breaching processes.QC 20231017