Private 5G and its Suitability for Industrial Networking

5G was and is still surrounded by many promises and buzzwords, such as the famous 1 ms, real-time, and Ultra-Reliable and Low-Latency Communications (URLLC). This was partly intended to get the attention of vertical industries to become new customers for mobile networks, which shall be deployed in their factories. With the allowance of federal agencies, companies deployed their own private 5G networks to test new use cases enabled by 5G. But what has been missing, apart from all the marketing, is the knowledge of what 5G can really do? Private 5G networks are envisioned to enable new use cases with strict latency requirements, such as robot control. This work has examined in great detail the capabilities of the current 5G Release 15 as private network, and in particular its suitability with regard to time-critical communications. For that, a testbed was designed to measure One-Way Delays (OWDs) and Round-Trip Times (RTTs) with high accuracy. The measurements were conducted in 5G Non-Standalone (NSA) and Standalone (SA) net-works and are the first published results. The evaluation revealed results that were not obvious or identified by previous work. For example, a strong impact of the packet rate on the resulting OWD and RTT was found. It was also found that typically 95% of the SA downlink end-to-end packet delays are in the range of 4 ms to 10 ms, indicating a fairly wide spread of packet delays, with the Inter-Packet Delay Variation (IPDV) between consecutive packets distributed in the millisecond range. Surprisingly, it also seems to matter for the RTT from which direction, i.e. Downlink (DL) or Uplink (UL), a round-trip communication was initiated. Another important factor plays especially the Inter-Arrival Time (IAT) of packets on the RTT distribution. These examples from the results found demonstrate the need to critically examine 5G and any successors in terms of their real-time capabilities. In addition to the end-to-end OWD and RTT, the delays caused by 4G and 5G Core processing has been investigated as well. Current state-of-the-art 4G and 5G Core implementations exhibit long-tailed delay distributions. To overcome such limitations, modern packet processing have been evaluated in terms of their respective tail-latency. The hardware-based solution was able to process packets with deterministic delay, but the software-based solutions also achieved soft real-time results. These results allow the selection of the right technology for use cases depending on their tail-latency requirements. In summary, many insights into the suitability of 5G for time-critical communications were gained from the study of the current 5G Release 15. The measurement framework, analysis methods, and results will inform the further development and refinement of private 5G campus networks for industrial use cases