Experimental Investigation of Repair Techniques for Deteriorated End Regions of Prestressed Concrete Bridge Girders

Due to harsh environmental conditions, the deterioration of prestressed concrete bridge girders is a commonly observed phenomenon in Indiana and much of the Midwest. Concordantly, one widely observed damage scenario is deteriorated end regions of prestressed concrete girders. Damaged or failed expansion joints expose prestressed concrete girder end regions to chloride-laden water, resulting in a corrosive environment in which reinforcement section loss and concrete spalling can occur. For bridges experiencing this type of deterioration, action is needed to ensure the structure remains safe and serviceable. As such, an experimental program was developed to investigate the effectiveness of three repair techniques in restoring the structural behavior of prestressed concrete bridge girders with end region deterioration. The three examined repair techniques are (i) an externally bonded fiber reinforced polymer (FRP) system, (ii) a near-surface-mounted (NSM) FRP system, and (iii) a concrete supplemental diaphragm. Additionally, installation procedures for the three end region repair techniques were developed. Results, conclusions, and recommendations from the experimental program are presented to help advise best practices for implementing end region repair techniques in the field