Design and Fabrication of High Capacity Lithium-Ion Batteries Using Electro-Spun Graphene Modified Vanadium Pentoxide Cathodes

Electrospinning has gained immense interests in recent years due to its potential application in various fields, including energy storage application. The v2o5/GOas a layered crystal structure has been demonstrated to fabricate nanofibers with diameters within a range of ∼300 nm through electrospinning technique. The porous, hollow, and interconnected nanostructures were produced by electrospinning formed by polymers such as Polyvinylpyrrolidone (PVP) and Polyvinyl alcohol (PVA), separately, as solvent polymers with electrospinning technique. In this study, we investigated the synthesis of a graphene-modified nanostructured v2o5 through modified sol-gel method and electrospinning of V2O5/GOhybrid. Electrochemical characterization was performed by utilizing Arbin Battery cycler, Field Emission Scanning Electron Microscopy (FESEM), X-ray powder diffraction (XRD), Thermogravimetric analysis (TGA), Mercury Porosimetery, and BET surface area measurement. As compared to the other conventional fabrication methods, our optimized solgel method, followed by the electrospinning of the cathode material achieved a high initial capacity of 342 mAhg−1 at a high current density of 0.5C (171 mAg−1 ) and the capacity retention of 80% after 20 cycles. Also, the prepared sol-gel method outperforms the pure v2o5cathode material, by obtaining the capacity almost two times higher. The results of this study showed that post-synthesis treatment of cathode material plays a prominent role in electrochemical performance of the nanostructured vanadium oxides. By controlling the annealing and drying steps, and time, a small amount of pyrolysis carbon can be retained, which improves the conductivity of the v2o5nanorods. Also, controlled post-synthesis helped us to prevent aggregation of electro-spun twisted nanostructured fibers which deteriorates the lithium diffusion process during charge/discharge of batteries