Application of Pulsed Thermography and Post-processing Techniques for CFRP Industrial Components

AbstractSeveral studies demonstrate the effectiveness of pulsed thermography for detection and visualization of sub-superficial flaws in composites. Continuous improvement of thermal data manipulation makes active thermography an attractive and powerful inspection method for industrial process control and maintenance aims. Therefore, temperature image-processing is the major ongoing challenge in the thermographic research field. However, the particular interest for thermographic inspections is to be more addressed to its simple and relatively fast industrial application; an appropriate image processing tool should be implemented and verified on industrial components, containing manufacturing and in-service defects. In the proposed research, well-established and previously proposed methods were analysed and compared for different defect typology inside three CFRP components. The main goal is not solely focused on establishing the suitable data processing approach, providing detection limits of processed data in terms of damage type, size and distribution. The aim of proposed work is to present detailed examples of thermal imaging methods applied on similar critical defects, evaluating different results among methods in terms of defects mapping capabilities and Tanimoto evaluation criterion, coupled also with the signal-to-noise ratio as assessment of defect detectability