The method developed at the Milan AVF Cyclotron for stabilizing the RF accelerating voltage is a passive network where the desired stabilization is achieved by a dummy resistive load connected to the Dee and driven by the RF voltage amplitude. A small amount of the power is extracted from the Dee through a capacitive coupling and feeds the plates of two tubes operating in push-pull mode
In this paper the study of the mechanisms responsible for the time varying beam current losses in CT...
International audienceA superconducting cyclotron accelerating q/A=0.5 ions up to 250 A.MeV, for med...
Klystron rf stability in the linac of ATF, Accelerator Test Facility at KEK, is important to make be...
This thesis discusses the design of a stable, 1.5 MW, 23.075 MHz, RF system for the TRIDMF cyclotron...
The RF power supply system for exciting the resonance system of the МСС-30/15 cyclotron is presented...
http://accelconf.web.cern.ch/AccelConf/c81/papers/ep-10.pdfInternational audienc
International audienceThe paper describes the characteristics of the amplitude and phase loops for t...
Two feedback loops are employed to control the phase and the amplitude stability of the Milan Superc...
International audience2. SERVO TUNING SYSTEMS The •general features of the amplitude and phase regul...
AbstractIn this paper the study of the mechanisms responsible for the time varying beam current loss...
The objective of the beam transport system is to make the accelerated particles reach the targets wi...
International audienceary A brief review of RF systems for large cyclotrons is presented. Critical f...
In this paper the study of the mechanisms responsible for the time varying beam current losses in CT...
International audienceA superconducting cyclotron accelerating q/A=0.5 ions up to 250 A.MeV, for med...
Klystron rf stability in the linac of ATF, Accelerator Test Facility at KEK, is important to make be...
This thesis discusses the design of a stable, 1.5 MW, 23.075 MHz, RF system for the TRIDMF cyclotron...
The RF power supply system for exciting the resonance system of the МСС-30/15 cyclotron is presented...
http://accelconf.web.cern.ch/AccelConf/c81/papers/ep-10.pdfInternational audienc
International audienceThe paper describes the characteristics of the amplitude and phase loops for t...
Two feedback loops are employed to control the phase and the amplitude stability of the Milan Superc...
International audience2. SERVO TUNING SYSTEMS The •general features of the amplitude and phase regul...
AbstractIn this paper the study of the mechanisms responsible for the time varying beam current loss...
The objective of the beam transport system is to make the accelerated particles reach the targets wi...
International audienceary A brief review of RF systems for large cyclotrons is presented. Critical f...
In this paper the study of the mechanisms responsible for the time varying beam current losses in CT...
International audienceA superconducting cyclotron accelerating q/A=0.5 ions up to 250 A.MeV, for med...
Klystron rf stability in the linac of ATF, Accelerator Test Facility at KEK, is important to make be...