Importance of earthquake rupture geometry on tsunami modelling: the Calabrian Arc subduction interface (Italy) case study

SUMMARY The behaviour of tsunami waves at any location depends on the local morphology of the coasts, the encountered bathymetric features, and the characteristics of the source. However, the importance of accurately modelling the geometric properties of the causative fault for simulations of seismically induced tsunamis is rarely addressed. In this work, we analyse the effects of using two different geometric models of the subduction interface of the Calabrian Arc (southern Italy, Ionian Sea) onto the simulated tsunamis: a detailed 3-D subduction interface obtained from the interpretation of a dense network of seismic reflection profiles, and a planar interface that roughly approximates the 3-D one. These models can be thought of as representing two end-members of the level of knowledge of fault geometry. We define three hypothetical earthquake ruptures of different magnitudes (Mw 7.5, 8.0, 8.5) on each geometry. The resulting tsunami impact is evaluated at the 50-m isobath in front of coastlines of the central and eastern Mediterranean. Our results show that the source geometry imprint is evident on the tsunami waveforms, as recorded at various distances and positions relative to the source. The absolute differences in maximum and minimum wave amplitudes locally exceed one metre, and the relative differences remain systematically above 20 per cent with peaks over 40 per cent. We also observe that tsunami energy directivity and focusing due to bathymetric waveguides take different paths depending on which fault is used. Although the differences increase with increasing earthquake magnitude, there is no simple rule to anticipate the different effects produced by these end-member models of the earthquake source. Our findings suggest that oversimplified source models may hinder our fundamental understanding of the tsunami impact and great care should be adopted when making simplistic assumptions regarding the appropriateness of the planar fault approximation in tsunami studies. We also remark that the geological and geophysical 3-D fault characterization remains a crucial and unavoidable step in tsunami hazard analyses