Model of the moving target shooting system

Rad obuhvaća različite segmente planiranja i izrade sustava. Od početka do kraja je prikazan cjelokupni način izrade. Kao što je vidljivo unutar uvodnih poglavlja prikazuje programsko i sklopovsko planiranje. Samim time dovodi do prikaza koliko je bitno planirati kako bi se smanjili troškovi izrade. Rad prikazuje povezanost između odabira komponenata koje su potrebne za izradu samoga sustava i suvremenih tehnologija, što se može primijetiti u povezivanju komponenata kao što su ESP-32 i HC-05 Bluetooth modul. Nakon prikazivanja vodi nas kroz komponente koje su korištene, te nam na vrlo jednostavan i kratak način predočava tehničke mogućnosti korištenih komponenata, te koliko je bitno prvotno se upoznati s njima i njihovim karakteristikama. U završnom koraku nakon što su prikazana programska i sklopovska rješenja dolazi do testiranja navedenih rješenja, te uklanjanja greški do kojih su nas testiranja dovela. Testiranja su vršena kroz različite programe i simulatore baš kako bi se greške uklonile i kako bismo dobili funkcionalan sustav za gađanje.The work includes different segments of project planning and development. From start to finish, it shows the entire production method. As we can see in the introduction, it shows the programmatic and structural planning of the project. It emphasizes how important it is to plan in advance in order to reduce the costs of creating a project. The work shows the connection between the selections components that are necessary for the creation of the project itself and modern technologies, which can be noticed in the connection of components such as ESP-32 microcontroller and HC-05 Bluetooth module. After the presentation, it guides us through the components that were used. In a very simple and short way it presents the technical possibilities of the used components and how important it is to familiarize yourself with them and their characteristics first. In the final step after display of program and circuit solutions, it brings us to testing the named solutions and elimination of errors that the tests led us to. Testing was done through various programs and simulators so that errors would be removed and so that the project would be functional