Experimental study on the behavior of thermally insulated RC beams strengthened with CFRP after their exposure to high temperatures compared to non- insulated ones

With regard to the expansion of the use of carbon fiber reinforced polymer (CFRP) in strengthening civil engineering structures due to its high positive points (like high tensile strength and low thickness) as well as its weaknesses in high temperatures especially in buildings and weak points of existing thermal insulators, the experiments mentioned in this article have been carried out to investigate the post-fire conditions of CFRP retrofitting systems using the externally bonded reinforcement technique which resulted from the need to use insulation for this type of reinforcement system to improve its heat performance, as well as the weak points of common insulations. In the first phase, 12 samples of reinforced concrete (RC) beams strengthened with externally bonded carbon fiber reinforced polymer (UD200) were heated at 400 °C, 500 °C, 600 °C, and 800 °C and loaded after cooling, then they were compared with the results of the second phase of the tests which have been explained completely, consisting of 11 RC beams strengthened with CFRP having exactly the same properties as those in the first phase. They were also thermally insulated with intumescent paint that had some advantages like low thickness (1.1 mm) and the speed and ease of implementation and restoration. These results have clearly shown that the new insulating layer not only can maintain the positive feature of common insulations, but also unlike other common insulators, does not add to the thickness of the specimens. Moreover, the application of the intumescent paint both increased the performance of the specimens at high temperatures and covered the weaknesses of CFRP reinforcement system against heat so that the CFRP sheets unlike the ones on the non-insulated specimens did not completely disappear at the highest temperature.The accepted manuscript in pdf format is listed with the files at the bottom of this page. The presentation of the authors' names and (or) special characters in the title of the manuscript may differ slightly between what is listed on this page and what is listed in the pdf file of the accepted manuscript; that in the pdf file of the accepted manuscript is what was submitted by the author