Coupling a road solar thermal collector and borehole thermal energy storage for building heating: First experimental and numerical results

The adoption of more efficient technologies that integrate renewable resources for heating buildings is a key action for increasing sustainability in the residential sector in the European Union. Borehole thermal energy storage and road thermal collector systems, which have mainly been integrated in colder countries to develop renewable systems, aimed at preventing the freezing of road surfaces in winter, could also be used in warmer countries to develop sustainable heating systems for buildings. In this experimental–numerical study, the possibility of integrating these two systems for the heating of buildings located in the Mediterranean region is investigated for the first time. To this end, a pilot plant was built at the facility test site of the University of Palermo, with the aim of demonstrating the possibility of storing solar energy in summer and recovering it in winter. A new method is proposed to characterize both the thermal conductivity and diffusivity of the different materials in the design phase of the plant. The results of simulations conducted with a validated numerical model show that the proposed system, characterized by an average annual collector efficiency of 10% and a seasonal storage efficiency of 80%, can reduce the length of borehole heat exchangers by about three times compared with a conventional geothermal heat pump plant