TEM-STEM study of europium doped gadolinium oxide nanoparticles synthesized by spray pyrolysis

Proocedings of: Fourth Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials. Kurashiki, Japan, 02-05 September 2012.Scanning-Transmission and Transmission Electron Microscopy techniques (STEM and TEM) have been applied to the characterization of nanostructured gadolinium oxides doped with europium synthesized by spray pyrolysis. The High Angle Annular Dark Field (HAADF) &- Scanning Transmission Electron Micros-copy (STEM) tools have been used to perform a tomographic study to identify morphological character-istics of nanostructured particles, and to differentiate them according to the heat treatments to which these have been subjected. With these techniques it has been possible to confirm the hollowness and por-ous nature of samples subjected to low temperature annealing (900 ºC). Moreover, the beginning of the densification and sintering processes in samples subjected to thermal treatment at higher temperature (1100 ºC) have been evaluated. Chemical analysis by electron energy loss spectroscopy (EELS) and X ray energy dispersive spectroscopy (EDS) carried out in STEM mode have allowed to confirm the high uni-formity and the expected chemical composition. The high resolution tools either allowed to confirm the presence of a cubic (Ia3 symmetry) and the monoclinic (c2/m symmetry) phases in the nanostructured particles.This work has been supported by the Advanced Structural Materials Program- ESTRUMAT (S2009/MAT-1585) and MAT2010-19837-C06-05. Thanks are extended to NanoPort (FEI)- Eindhoven, especially to Eng. L. Fernando Mendoza and to the Ministry of Science and Technology of Serbia (Project #142010).Publicad