Purification of a monoclonal antibody using a novel high-capacity multimodal cation exchange nonwoven membrane

A high-capacity, multimodal cation exchange (MMC) chromatographic membrane was developed by conjugating a multimodal ligand – 2-mercaptopyridine-3-carboxylic acid (MPCA) – on a polybutylene terepthalate (PBT) nonwoven fabric. The membrane features an equilibrium binding capacity of ≈ 1000 mg of human polyclonal IgG (IgG) per g of membrane and dynamic binding capacities (DBC10%) ranging from 77.5 to 115.1 mg/mL (residence times of 1 and 5 min, respectively); these values are 2-to-3-fold higher than those of commercial MMC adsorbents. The effects of buffer composition, pH, conductivity on the binding behavior of the MMC-MPCA membrane were investigated in detail. As a moderate cation exchange binder, MPCA enables effective protein elution using buffers with mild pH (8.0–9.0) and conductivity (≈13 mS/cm), thus circumventing the harsh conditions often needed in multimodal chromatography. The MMC-MPCA membrane was evaluated for product capture in bind-and-elute mode on a Chinese hamster ovary (CHO) cell culture harvest containing therapeutic monoclonal antibodies, using commercial multimodal (Capto MMC and MX-Trp-650M) and affinity (AF-rProtein A HC-650F) resins as controls. The MMC-MPCA membrane outperformed the multimodal resins in terms of binding capacity as well as clearance of host cell proteins (HCPs) and aggregates. The membrane was then evaluated by polishing the mAb from a Protein A eluate in bind-and-elute mode. The MMC-MPCA membrane reduced the level of high molecular weight components from 11% to 4% and the HCP content from 1319.7 ppm to 48.7 ppm (LRV of 1.4). Most notably, proteomics analysis of the product demonstrated the clearance of a significant fraction of persistent, high-risk HCPs from the Protein A eluate