Computational Simulation - Design & Analysis Functionality of Grid Connected (GC) PhotoVoltaic (PV) System

The electrical power produced via photo-voltaic (PV) array relies largely on weather conditions. In this paper, we presented a continuous state functionality of the PV gridconnected (GC) unit at distinct solar irradiances. The presented model is developed on MATLAB environment, which includes the PV array using an improved perturb and observe (MP&O) tracking system interconnected to DC to DC boosting conversion application, the 3-phase 3 level electric power inverter which usually associated to the utility grid using low pass filter, coupled transformer and synchronous control mechanism of PV inverter. The presented model is lab-created within day-by- day climatic conditions to estimate its working mechanism. The simulation results of the proposed system satisfy requirements grid performance with high power quality. In the proposed work number of cell modules used 90, number of parallel strings 60, maximum PV output voltage1000wb/m2 at 274 V, minimum voltage at 600 wb/m2 at 250V, maximum power at 1000 wb/m2-100 kw, and minimum power at 600 wb/m2-57 kw