This study investigated the potential of using waste derived biochar as an alternative filler to manufacture biodegradable non fossil derived biocomposites. Two types of biochars, i.e. (1) wood and (2) sewage sludge derived biochars were used as fillers in Polylactic acid (PLA) and BIOPLAST GS2189 biocomposites with the loading rate up to 20% (by weight). The laboratory manufactured testing samples of these biocomposites were subject to the following tests: water adsorption, tensile strength, impact strength, differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA) and optical and SEM microscopy. The results showed that the addition of biochar had the effect on all the investigated parameters, including mechanical, thermal...
This study reports about the use of Biochar derived from maple tree as a filler in Epoxy resin. Mapl...
Various environmental drawbacks such as reduction in land fill space and nonbiodegradability lead to...
Biodegradable poly (lactic acid) (PLA) based biocomposites reinforced with rice hulls were prepared ...
The strive for utilization of green fillers in polymer composite has increased focus on application ...
This study focused on the development of a novel biocomposite material formed by a thermoplastic bio...
Biowęgiel z uwagi na swoje właściwości może znaleźć zastosowanie w produkcji kompozytów polimerowych...
This study explores the possibility of developing a new class of hybrid particulate-filled biocompos...
Bio-based polymers, obtained from natural biomass, are nowadays considered good candidates for the r...
The conversion of polymer waste, food waste, and biomasses through thermochemical decomposition to f...
The biological treatment of pulp and paper mills effluents results in the production of waste second...
The biological treatment of pulp and paper mills effluents results in the production of waste second...
The environmental impacts of cement and concrete industries are increasingly taken into consideratio...
The strive for utilization of green fillers in polymer composite has increased focus on application ...
We review the conversion of waste biomass into recyclable materials using different methods of mater...
Biochar is produced through thermochemical decomposition, so called as pyrolysis, of different bioma...
This study reports about the use of Biochar derived from maple tree as a filler in Epoxy resin. Mapl...
Various environmental drawbacks such as reduction in land fill space and nonbiodegradability lead to...
Biodegradable poly (lactic acid) (PLA) based biocomposites reinforced with rice hulls were prepared ...
The strive for utilization of green fillers in polymer composite has increased focus on application ...
This study focused on the development of a novel biocomposite material formed by a thermoplastic bio...
Biowęgiel z uwagi na swoje właściwości może znaleźć zastosowanie w produkcji kompozytów polimerowych...
This study explores the possibility of developing a new class of hybrid particulate-filled biocompos...
Bio-based polymers, obtained from natural biomass, are nowadays considered good candidates for the r...
The conversion of polymer waste, food waste, and biomasses through thermochemical decomposition to f...
The biological treatment of pulp and paper mills effluents results in the production of waste second...
The biological treatment of pulp and paper mills effluents results in the production of waste second...
The environmental impacts of cement and concrete industries are increasingly taken into consideratio...
The strive for utilization of green fillers in polymer composite has increased focus on application ...
We review the conversion of waste biomass into recyclable materials using different methods of mater...
Biochar is produced through thermochemical decomposition, so called as pyrolysis, of different bioma...
This study reports about the use of Biochar derived from maple tree as a filler in Epoxy resin. Mapl...
Various environmental drawbacks such as reduction in land fill space and nonbiodegradability lead to...
Biodegradable poly (lactic acid) (PLA) based biocomposites reinforced with rice hulls were prepared ...