Aerodynamic characterisation of porous fairings : pressure drop and Laser Doppler Velocimetry measurements

Aviation has become a mass transportation industry, and all prospective studies foresee growth in this sector. Among the challenges, noise in the vicinity of airports has gone from a marginal annoyance to a real public health concern. To address this problem, as well as others such as fuel consumption, aircraft manufacturers are considering radically new aircraft architectures that could enter service quickly. In the meantime, however, the noise of traditional aircraft must be reduced significantly. Aircraft noise, during takeoff and landing, results primarily from a combination of (i) engine noise, which is generated by the fan and jet, and (ii) airframe noise, primarily due to the landing gear (LG) and high lift devices (HLD), the latter including slats and trailing edge flaps, which are deployed at low speeds to increase lift. During takeoff, engine noise remains dominant, while on approach and landing, engines operate at low speeds (typically 50% of N1), and airframe noise becomes a significant contributor, especially for newer aircraft equipped with latest generation turbofans. Its mitigation is therefore of primary interest. However, due to the strong integration constraints imposed by other disciplines than acoustics on components such as LGs and HLDs, the development of noise reduction technologies (NRT) on these airframe components has been limited. This lack of breakthroughs is also due to the complexity of flow physics, and thus our still limited knowledge of airframe noise generation mechanisms. The noise of the landing gear, slats and flaps has been studied on a real and reduced scale, mainly on the basis of experimental means. The maturity of numerical simulations now allows to study the mechanisms of the noise sources on various complex configurations. Moreover, numerical simulation methods can be sufficiently accurate to predict the noise generated by such configurations. In order to take the next step in the maturity of numerical prediction, these NIRs must be accurately evaluated and modeled. Experimental data based on academic configurations are therefore needed to validate the new tools and numerical models. One promising NRT is the use of a fairing in front of the landing gear to reduce the noise of this system. The present study aims at collecting an experimental database (pressure drop and turbulence characteristics) of several fairing solutions in order to have validation test cases for CFD simulation and thus develop new models for such complex geometries. The fairing samples are thus tested on the "Acoustic and Aerothermal Bench" (B2A), by measuring the pressure drop of each sample and the flow field by Laser Doppler Velocimetry (LDV). The experimental methodology will be presented first. The database will then be described. Some technical validations will also be proposed on the basis of a comparison with the literature