This study revealed compression-compression fatigue behavior of woven roving GFRP laminate used in civil structures. Both static compression test and compression-compression fatigue test were conducted. As a result, fatigue failure was observed even in the compression fatigue test. The S-N curve of compression fatigue was similar to those of tensile fatigue, but the compression fatigue test exhibited smaller fatigue strength than tension when fatigue failure occurred at small loading cycles. Moreover, the stiffness measured through the fatigue test revealed that stiffness decreased as the loading cycle increased. Finally, authors proposed the model which can express the stiffness degradation under compression fatigue.Paper 8
This paper reports on an experimental investigation into the fatigue life of Glass Fibre Reinforced ...
Advanced fiber reinforced composite materials offer substantial advantages over metallic materials f...
Fatigue data of glass epoxy woven laminate specimens cut at different angles to principal axes are r...
This paper presents the investigation of composite materials lamination using different materials in...
This paper presents the investigation of composite materials lamination using different materials i...
In the present work, two woven carbon/epoxy laminates with different areal weight were tested under ...
The applications of hybrid natural/synthetic reinforced polymer composites have been rapidly gaining...
Fiber-reinforced polymer (FRP) composites are used in engineering structures of several domains, suc...
The apparent secant stiffness changes with the cyclic number for both unnotched and notched woven la...
Efficient design of woven composite structures is limited by a knowledge gap in predictive modeling ...
A woven CFRP composite laminate has been thoroughly characterized under fatigue. Over 150 tests were...
Due to their high specific stiffness and strength, fibre-reinforced composite materials are winning ...
The applications of hybrid natural/synthetic reinforced polymer composites have been rapidly gaining...
peer reviewedUnderstanding the out-of-plane mechanical behavior of composite materials is necessary ...
This paper focuses on the fretting fatigue behaviour of pin-loaded carbon-fibre-reinforced polymer (...
This paper reports on an experimental investigation into the fatigue life of Glass Fibre Reinforced ...
Advanced fiber reinforced composite materials offer substantial advantages over metallic materials f...
Fatigue data of glass epoxy woven laminate specimens cut at different angles to principal axes are r...
This paper presents the investigation of composite materials lamination using different materials in...
This paper presents the investigation of composite materials lamination using different materials i...
In the present work, two woven carbon/epoxy laminates with different areal weight were tested under ...
The applications of hybrid natural/synthetic reinforced polymer composites have been rapidly gaining...
Fiber-reinforced polymer (FRP) composites are used in engineering structures of several domains, suc...
The apparent secant stiffness changes with the cyclic number for both unnotched and notched woven la...
Efficient design of woven composite structures is limited by a knowledge gap in predictive modeling ...
A woven CFRP composite laminate has been thoroughly characterized under fatigue. Over 150 tests were...
Due to their high specific stiffness and strength, fibre-reinforced composite materials are winning ...
The applications of hybrid natural/synthetic reinforced polymer composites have been rapidly gaining...
peer reviewedUnderstanding the out-of-plane mechanical behavior of composite materials is necessary ...
This paper focuses on the fretting fatigue behaviour of pin-loaded carbon-fibre-reinforced polymer (...
This paper reports on an experimental investigation into the fatigue life of Glass Fibre Reinforced ...
Advanced fiber reinforced composite materials offer substantial advantages over metallic materials f...
Fatigue data of glass epoxy woven laminate specimens cut at different angles to principal axes are r...