Site attenuation is a measure of performance of an open test site at frequencies below about 1 GHz. These sites typically consist of a large obstruction-free ground plane and the hemisphere above it. Calculations of site attenuation are presented which provide a reference for measurements made on a 30-by 60-m wire-mesh ground screen. Measured data are compared to the calculated results
Report discussing microwave attenuation measurement methods and standards. In addition, a relatively...
An open area test site (OATS) for electromagnetic compatibility (EMC) antennas calibration will be b...
The rain rate distribution is the input data used in models predicting the rain attenuation distribu...
Abstract: Site attenuation is a measure of performance of an open test site used at frequencies belo...
Spherical dipole antenna has been used to evaluate EMC performance because it can consider small dip...
The measurement of electromagnetic interference can be performed e.g. on open area test sites with d...
Open-area test site (OATS) calibration is discussed in this tutorial. The calibration is performed a...
The site attenuation is an important parameter to evaluate an anechoic chamber. The ray-tracing meth...
An antenna is calibrated in an open-field test site (OFTS) and/or an anechoic chamber, which facilit...
An open area test site (OATS) for electromagnetic compatibility (EMC) antennas calibration will be b...
In this study, the characteristics of site amplification at seismic observation stations in Japan we...
ABSTRACT- The RAF accelerometric database is used to estimate site effects at several RAF stations. ...
The attenuation of electro-statically and electro-magnetically shielded rooms in the ``E,`` ``R,`` `...
Measurements of the lateral attenuation of noise from aircraft operations at Denver International Ai...
Intensive research and development activity on low-terahertz (0.1-1 THz) electronics, including rece...
Report discussing microwave attenuation measurement methods and standards. In addition, a relatively...
An open area test site (OATS) for electromagnetic compatibility (EMC) antennas calibration will be b...
The rain rate distribution is the input data used in models predicting the rain attenuation distribu...
Abstract: Site attenuation is a measure of performance of an open test site used at frequencies belo...
Spherical dipole antenna has been used to evaluate EMC performance because it can consider small dip...
The measurement of electromagnetic interference can be performed e.g. on open area test sites with d...
Open-area test site (OATS) calibration is discussed in this tutorial. The calibration is performed a...
The site attenuation is an important parameter to evaluate an anechoic chamber. The ray-tracing meth...
An antenna is calibrated in an open-field test site (OFTS) and/or an anechoic chamber, which facilit...
An open area test site (OATS) for electromagnetic compatibility (EMC) antennas calibration will be b...
In this study, the characteristics of site amplification at seismic observation stations in Japan we...
ABSTRACT- The RAF accelerometric database is used to estimate site effects at several RAF stations. ...
The attenuation of electro-statically and electro-magnetically shielded rooms in the ``E,`` ``R,`` `...
Measurements of the lateral attenuation of noise from aircraft operations at Denver International Ai...
Intensive research and development activity on low-terahertz (0.1-1 THz) electronics, including rece...
Report discussing microwave attenuation measurement methods and standards. In addition, a relatively...
An open area test site (OATS) for electromagnetic compatibility (EMC) antennas calibration will be b...
The rain rate distribution is the input data used in models predicting the rain attenuation distribu...
DOI
Add to ORKG