In the work, the measurement of the solubility of synthesis gas was carried out in the temperature range of 100–300°C and pressure range of 1.0–5.0 MPa. n–dodecane was used as a solvent, as it is one of the most frequently used solvents in the liquid-phase Fischer–Tropsch synthesis. Based on the results obtained in the work, thermodynamic parameters of absorption were calculated, such as the Henry constant, absorption enthalpy and apparent activation energy of absorption. The phase equilibrium was calculated using the Soave–Redlich–Kwong cubic equation of state. It was shown that the SRK cubic equation of state can be used to predict the optimal process conditions for the liquid–phase Fischer–Tropsch process. The applicability of the data w...
Includes abstract.Includes bibliographical references (p. 84-87).Fischer Tropsch Synthesis (FTS) is ...
The gas-liquid solubilities of the solutes carbon monoxide, carbon dioxide, hydrogen, water, ethane,...
The ultimate goal of this paper is the assessment of the yield of liquid hydrocarbons formed in the ...
The solubilities of gases in n-paraffins and in wax mixtures are measured and correlated. Results of...
The synthesis of hydrocarbons (HC) from syngas (a mixture of hydrogen and carbon monoxide), commonly...
AbstractSlurry phase Fischer-Tropsch synthesis is an important and promising route to produce clean ...
Various thermodynamic models were tested concerning their applicability to predict gas-liquid solubi...
In this study, the equilibrium solubility, C*, and the volumetric mass transfer coefficient, kLa, we...
The synthesis of synthetic hydrocarbons (HC) from syngas (a mixture of hydrogen and carbon monoxide)...
The design and the performances of reactors for the low-temperature Fischer–Tropsch synthesis may be...
Under previous support from the Department of Energy, an experimental facility has been established ...
The Fischer–Tropsch synthesis represents a time-tested and fully proven technology for the conversio...
Includes abstract.Includes bibliographical references (p. 84-87).Fischer Tropsch Synthesis (FTS) is ...
The gas-liquid solubilities of the solutes carbon monoxide, carbon dioxide, hydrogen, water, ethane,...
The ultimate goal of this paper is the assessment of the yield of liquid hydrocarbons formed in the ...
The solubilities of gases in n-paraffins and in wax mixtures are measured and correlated. Results of...
The synthesis of hydrocarbons (HC) from syngas (a mixture of hydrogen and carbon monoxide), commonly...
AbstractSlurry phase Fischer-Tropsch synthesis is an important and promising route to produce clean ...
Various thermodynamic models were tested concerning their applicability to predict gas-liquid solubi...
In this study, the equilibrium solubility, C*, and the volumetric mass transfer coefficient, kLa, we...
The synthesis of synthetic hydrocarbons (HC) from syngas (a mixture of hydrogen and carbon monoxide)...
The design and the performances of reactors for the low-temperature Fischer–Tropsch synthesis may be...
Under previous support from the Department of Energy, an experimental facility has been established ...
The Fischer–Tropsch synthesis represents a time-tested and fully proven technology for the conversio...
Includes abstract.Includes bibliographical references (p. 84-87).Fischer Tropsch Synthesis (FTS) is ...
The gas-liquid solubilities of the solutes carbon monoxide, carbon dioxide, hydrogen, water, ethane,...
The ultimate goal of this paper is the assessment of the yield of liquid hydrocarbons formed in the ...