Evaluation of waste engine oil rejuvenation for highly short term aged asphalt binder

The aging property of the asphalt binder is time-dependent. A time-dependent short-term aging property of 80/100 penetration grade bitumen and the possibility of waste engine oil rejuvenation for the highly aged asphalt binder performance were investigated. Four specimens of equal weight from the penetration grade-80/100 bitumen are collected. The first specimen was checked for quality requirements. The other three specimens were aged using a rolling thin film oven for 85, 115, and 145 minutes to simulate the delay during hot mix asphalt production, hauling, and compaction. The highly aged bitumen was rejuvenated with 2%, 5%, and 10% Waste Engine Oil by weight. Results indicated that as the aging time increased, penetration and ductility decreased, softening point, flash point, fire point, and mass loss increased. A conventional test showed that highly aged bitumen from the trial period was 145 minutes and 10% waste engine oil obtained the optimum dosage. Further, multiple stress creeps recovery analyses indicated the rejuvenated binder is prone to pavement rutting above 70°C, and rejuvenation is effective for pavement temperature below 70°C. Hence, exposing the asphalt binder to temperature for a more extended period affects pavement performance