Impacts of Moisture on Asphalt Properties

Stripping related moisture damage has been recognized as one of the major pavement distresses since the early 1990s. The main objective of this study is to establish an effective test protocol to quantify moisture susceptibility of asphalt pavements. To this end, selective test methods (Texas Boiling test, Tensile Strength Ratio, Retained Stability, and Hamburg Wheel Test), and procedures based on surface chemistries and molecular-level mechanistic properties have been investigated in this study. Firstly, a comprehensive list of literature related to moisture damage in asphalts was reviewed. Based on the literature review, a detailed project plan and test matrix were developed. Binder samples originated from two different crude sources were collected. The moisture resistance related tests such as static contact angle measurements and Texas Boiling tests were conducted. Besides, asphalt binders’ nanomechanical properties using an Atomic Force Microscopy (AFM) and surface chemistries using a static contact were evaluated in the laboratory. Based on limited test data and analysis, it is concluded that there does not exist any single test method that all agencies are comfortable and equipped to follow in their daily work as each technique has some merits and demerits. However, the Texas Boiling test is found to be the simplest method that requires minimal time and resources. On the other hand, surface chemistry and atomic force microscope-based techniques are becoming popular among researchers and pavement professionals. Findings of this study are expected to help ARDOT in selecting an appropriate moisture resistance test method that is simple, reliable, and easy to implement in their routine work.Tran-SET Project No. 17BASU0