Iot Based Intelligent Traffic Control System with Automatic Fine System and Pollution Detection

The project is aimed at designing a density based dynamic traffic signal system where the timing of signal will change automatically on sensing the traffic density at any junction. Sometimes higher traffic density at one side of the junction demands longer green time as compared to standard allotted time We, therefore propose here a mechanism in which the time period of green light and red light is assigned on the basis of the density of the traffic present at that time. This is achieved by using IR(Infrared sensors). Once the density is calculated, the glowing time of green light is assigned by the help of the microcontroller.The sensors which are present on sides of the road will detect the presence of the vehicles and sends the information to the microcontroller where it will decide how long a flank will be open or when to change over the signal lights. In subsequent sections, we have elaborated the procedure of this framework. and in this project we will add automatic fine system using RFID Reader that people will drive in footpath. the reader present footpath sides and cards fixed in the cars or bikes will detect if they go from footpath automatically scan and makes fine send to traffic office. And we can detect smoke amount of polluted air in the traffic signal areas by using the smoke sensors and monitors the pollution value at the traffic area