The primary goal of the Single-Stage-to-Orbit technology is radially to reduce the cost of access to Space. The Winged rocket developed by Kyushu Institute of Technology, Japan is the test bed and technology demonstrator for this effort. To successfully complete these missions, estimation of air data parameters are vital. FADS (Flush Air Data System) is utilized for the winged rocket. The flight control system requires indispensable air data acquisition with high precision and high reliability. However, under severe thermal environment of re-entry, the failure risk of pressure ports is high and there is as possibility that acquisition of the air data accuracy may not be reliable, which adversely affects the flight control. In this paper, th...
Flight data recorded during atmospheric entry with forebody pressure instrumentation, referred to as...
Air data parameters are required during Orbiter atmospheric entry for use by the autoguidance, navig...
Flush pressure orifices installed on the nose section of a 1/7-scale model of the F-14 airplane were...
This paper presents the design of the X-33 Flush Airdata Sensing (FADS) system. The X-33 FADS uses a...
NASA Dryden Flight Research Center has developed a flush airdata sensing (FADS) system on a sharp-no...
In the frame of the HEXAFLY-INT project [5, 6] a Flush Air Data Sensing system (FADS) was design to ...
This paper presents the design of the X-33 Flush Airdata Sensing (FADS) system. The X-33 FADS uses a...
Flush Air-Data Sensing (FADS) systems use an array of surface pressure measurements to infer the spe...
This paper presents information regarding the nosecap Flush Airdata Sensing (FADS) system on Orions ...
The HEXAFLY-INT flight vehicle is a small-scale flight demonstrator of a supersonic passenger aircra...
A prototype real-time flush airdata sensing (RT-FADS) system has been developed and flight tested at...
Blunt-forebody pressure data are used to study the behavior of the NASA Dryden Flight Research Cente...
A prototype real-time flush airdata sensing (RT–FADS) system has been developed and flight tested at...
We describe the use of computational fluid dynamics (CFD) simulations for calibrating a flush air da...
This paper presents a design study for a pressure based Flush airdata system (FADS) on the Hypersoni...
Flight data recorded during atmospheric entry with forebody pressure instrumentation, referred to as...
Air data parameters are required during Orbiter atmospheric entry for use by the autoguidance, navig...
Flush pressure orifices installed on the nose section of a 1/7-scale model of the F-14 airplane were...
This paper presents the design of the X-33 Flush Airdata Sensing (FADS) system. The X-33 FADS uses a...
NASA Dryden Flight Research Center has developed a flush airdata sensing (FADS) system on a sharp-no...
In the frame of the HEXAFLY-INT project [5, 6] a Flush Air Data Sensing system (FADS) was design to ...
This paper presents the design of the X-33 Flush Airdata Sensing (FADS) system. The X-33 FADS uses a...
Flush Air-Data Sensing (FADS) systems use an array of surface pressure measurements to infer the spe...
This paper presents information regarding the nosecap Flush Airdata Sensing (FADS) system on Orions ...
The HEXAFLY-INT flight vehicle is a small-scale flight demonstrator of a supersonic passenger aircra...
A prototype real-time flush airdata sensing (RT-FADS) system has been developed and flight tested at...
Blunt-forebody pressure data are used to study the behavior of the NASA Dryden Flight Research Cente...
A prototype real-time flush airdata sensing (RT–FADS) system has been developed and flight tested at...
We describe the use of computational fluid dynamics (CFD) simulations for calibrating a flush air da...
This paper presents a design study for a pressure based Flush airdata system (FADS) on the Hypersoni...
Flight data recorded during atmospheric entry with forebody pressure instrumentation, referred to as...
Air data parameters are required during Orbiter atmospheric entry for use by the autoguidance, navig...
Flush pressure orifices installed on the nose section of a 1/7-scale model of the F-14 airplane were...