EUCOM -EVALUATING THE UNCERTAINTY IN COORDINATE METROLOGY: AN EMPIR (EU) PROJECT

Comparison of PD Calibration Capabilities in Four National Metrology Institutes Down to 0.1 pC

Hällström, Jari
Havunen, Jussi
Bergman, Allan E.
Elg, Alf-Peter
Merev, Ahmet
Dedeoğlu, Serkan
Karaman, İsmail
Simón, Pascual
Rovira, Jorge
Garcia, Tomás
Garnacho, Fernando

June 2019

Per-Print of a paper accepted for presentation in the 21st International Symposium on High Voltage E...

Metrology for radiation protection: a new European network in the foundation phase

Röttger, Annette
Veres, Attila
Sochor, Vladimir
Pinto, Massimo
Derlacinski, Michal
Ioan, Mihail-Razvan
Sabeta, Amra
Bernat, Robert
Adam-Guillermin, Christelle
Alves, João
Glavič-Cindro, Denis
Bell, Steven
Wens, Britt
Persson, Linda
Živanović, Milos
Nylund, Reetta

November 2021

International audienceEuropean Metrology Networks are organized under the umbrella of EURAMET in ord...

The MeteoMet2 project:Highlights and results

Merlone, A.
Sanna, F.
Beges, G.
Bell, S.
Beltramino, G.
Bojkovski, J.
Brunet, M.
Del Campo, D.
Castrillo, A.
Chiodo, N.
Colli, M.
Coppa, G.
Cuccaro, R.
Dobre, M.
Drnovsek, J.
Ebert, V.
Fernicola, V.
Garcia-Benadí, A.
Garcia-Izquierdo, C.
Gardiner, T.
Georgin, E.
Gonzalez, A.
Groselj, D.
Heinonen, Martti
Hernandez, S.
Högström, Richard
Hudoklin, D.
Kalemci, M.
Kowal, A.
Lanza, L.
Miao, P.
Musacchio, C.
Nielsen, J.
Nogueras-Cervera, M.
Oguz Aytekin, S.
Pavlasek, P.
De Podesta, M.
Rasmussen, M. K.
Del-Río-Fernández, J.
Rosso, L.
Sairanen, Hannu
Salminen, Juho
Sestan, D.
Šindelářová, L.
Smorgon, D.
Sparasci, F.
Strnad, R.
Underwood, R.
Uytun, A.
Voldan, M.

January 2018

Launched in 2011 within the European Metrology Research Programme (EMRP) of EURAMET, the joint resea...

Introduction to EUCoM -Evaluation of Uncertainty in Coordinate Metrology-

Alessandro Balsamo

July 2017

Presentation - EUCoM kick-off meeting - Turin, 2017-07-10/11EMPIR Grant Agreement 17NRM03 EUCoM - Th...

Publishable Summary for 17NRM03 EUCoM Standards for the evaluation of the uncertainty of coordinate measurements in industry

Project Consortium

April 2019

Publishable Summary for 17NRM03 EUCoMEMPIR Grant Agreement 17NRM03 EUCoM - This project has received...

ISO/TS 15530-2 GPS CMMs: Techniques for evaluation of the uncertainty of measurement. Part 2: Use of multiple measurement strategies in measurements of artefacts

Vít Zelený
Ivana Linkeová
Jakub Sýkora
Pavel Skalník

November 2019

Presentation - EUCoM meeting, PTB, Braunschweig, 5-6 November 2019EMPIR Grant Agreement 17NRM03 EUCo...

Freeform metrology – freeform surface inspection

Ivana Linkeová
Vít Zelený
Jakub Sýkora
Pavel Skalník
Jaromír Hynek

November 2019

Technical Report - Freeform MetrologyEMPIR Grant Agreement 17NRM03 EUCoM - This project has received...

Novel mathematical and statistical approaches to uncertainty evaluation: introducing a new EMRP research project

Markus Bär
Clemens Elster
Sebastian Heidenreich
Clare Matthews
Leslie Pendrill
Louise Wright

October 2013

The European Metrology Research Programme (EMRP) is funding project EMRP-NEW04 on novel mathematical...

TRAINING IN COORDINATE METROLOGY EUKOM: MADE IN EUROPE – OPEN TO THE WORLD

Albert Weckenmann

January 2006

Abstract: Due to the flexibility and precision of coordinate metrology operators have to possess com...

European Metrology Research Programme - a chance for development of metrology

Otczyk, A.
Sochocka, D.

January 2007

W referacie omówiono etapy i problemy rozwoju wspólnej płaszczyzny współpracy w zakresie metrologii ...

An approach to improve accuracy and productivity of industrial CMM measurements at high scanning speed

Aleksandar Arsovic
Marco Menoncin
Enrico Savio

June 2021

Proceeding - euspen’s 21st International Conference & Exhibition, Copenhagen, DK, June 2021EMPIR Gra...

University Erlangen-Nuremberg

Albert Weckenmann
Sebastian Beetz

January 2003

Abstract − The constant increase of the application ar-eas of coordinate metrology is due to the uni...

Metrology supporting the European regulation for radiation protection

Alves, João, G
Caldeira, Margarida, C
Röttger, Annette
Khanbabaee, Behnam
Adam-Guillermin, Christelle
Siiskonen, Teemu
Živanović, Miloš
Šabeta, Amra
Glavič-Cindro, Denis

November 2023

International audienceThe European Association of National Metrology Institutes (EURAMET) within its...

European Metrology Network for Advanced Manufacturing

2. A. Evans
A. Przyklenk
H. Bosse
V. Zeleny
D. Czułek
A. Balsamo
D. O’Connor
T. Yandayan
D. Phillips
F. Meli
C. S. Ragusa
O. Flys

January 2021

The progress of Advanced Manufacturing, which has been identified by the European Commission as a Ke...

Document specifying rules for the secure use of DCC covering legal aspects of metrology

Nikander, Pekka
Elo, Tommi
Mustapää, Tuukka
Kuosmanen, Petri
Hovhannisyan, Kristine
Maennel, Olaf
Brown, Clifford
Dawkins, John
Rhodes, Susan
Smith, Ian
Hutzschenreuter, Daniel
Weber, Henrike
Heeren, Wiebke
Schönhals, Shanna
Wiedenhöfer, Thomas

February 2020

This document will outline the "as-is" state of the existing European and international quality infr...

Comparison of PD Calibration Capabilities in Four National Metrology Institutes Down to 0.1 pC

Hällström, Jari
Havunen, Jussi
Bergman, Allan E.
Elg, Alf-Peter
Merev, Ahmet
Dedeoğlu, Serkan
Karaman, İsmail
Simón, Pascual
Rovira, Jorge
Garcia, Tomás
Garnacho, Fernando

June 2019

Per-Print of a paper accepted for presentation in the 21st International Symposium on High Voltage E...

Metrology for radiation protection: a new European network in the foundation phase

Röttger, Annette
Veres, Attila
Sochor, Vladimir
Pinto, Massimo
Derlacinski, Michal
Ioan, Mihail-Razvan
Sabeta, Amra
Bernat, Robert
Adam-Guillermin, Christelle
Alves, João
Glavič-Cindro, Denis
Bell, Steven
Wens, Britt
Persson, Linda
Živanović, Milos
Nylund, Reetta

November 2021

International audienceEuropean Metrology Networks are organized under the umbrella of EURAMET in ord...

The MeteoMet2 project:Highlights and results

Merlone, A.
Sanna, F.
Beges, G.
Bell, S.
Beltramino, G.
Bojkovski, J.
Brunet, M.
Del Campo, D.
Castrillo, A.
Chiodo, N.
Colli, M.
Coppa, G.
Cuccaro, R.
Dobre, M.
Drnovsek, J.
Ebert, V.
Fernicola, V.
Garcia-Benadí, A.
Garcia-Izquierdo, C.
Gardiner, T.
Georgin, E.
Gonzalez, A.
Groselj, D.
Heinonen, Martti
Hernandez, S.
Högström, Richard
Hudoklin, D.
Kalemci, M.
Kowal, A.
Lanza, L.
Miao, P.
Musacchio, C.
Nielsen, J.
Nogueras-Cervera, M.
Oguz Aytekin, S.
Pavlasek, P.
De Podesta, M.
Rasmussen, M. K.
Del-Río-Fernández, J.
Rosso, L.
Sairanen, Hannu
Salminen, Juho
Sestan, D.
Šindelářová, L.
Smorgon, D.
Sparasci, F.
Strnad, R.
Underwood, R.
Uytun, A.
Voldan, M.

January 2018

Launched in 2011 within the European Metrology Research Programme (EMRP) of EURAMET, the joint resea...

Introduction to EUCoM -Evaluation of Uncertainty in Coordinate Metrology-

Alessandro Balsamo

July 2017

Presentation - EUCoM kick-off meeting - Turin, 2017-07-10/11EMPIR Grant Agreement 17NRM03 EUCoM - Th...

Publishable Summary for 17NRM03 EUCoM Standards for the evaluation of the uncertainty of coordinate measurements in industry

Project Consortium

April 2019

Publishable Summary for 17NRM03 EUCoMEMPIR Grant Agreement 17NRM03 EUCoM - This project has received...

ISO/TS 15530-2 GPS CMMs: Techniques for evaluation of the uncertainty of measurement. Part 2: Use of multiple measurement strategies in measurements of artefacts

Vít Zelený
Ivana Linkeová
Jakub Sýkora
Pavel Skalník

November 2019

Presentation - EUCoM meeting, PTB, Braunschweig, 5-6 November 2019EMPIR Grant Agreement 17NRM03 EUCo...

Freeform metrology – freeform surface inspection

Ivana Linkeová
Vít Zelený
Jakub Sýkora
Pavel Skalník
Jaromír Hynek

November 2019

Technical Report - Freeform MetrologyEMPIR Grant Agreement 17NRM03 EUCoM - This project has received...

Novel mathematical and statistical approaches to uncertainty evaluation: introducing a new EMRP research project

Markus Bär
Clemens Elster
Sebastian Heidenreich
Clare Matthews
Leslie Pendrill
Louise Wright

October 2013

The European Metrology Research Programme (EMRP) is funding project EMRP-NEW04 on novel mathematical...

TRAINING IN COORDINATE METROLOGY EUKOM: MADE IN EUROPE – OPEN TO THE WORLD

Albert Weckenmann

January 2006

Abstract: Due to the flexibility and precision of coordinate metrology operators have to possess com...

European Metrology Research Programme - a chance for development of metrology

Otczyk, A.
Sochocka, D.

January 2007

W referacie omówiono etapy i problemy rozwoju wspólnej płaszczyzny współpracy w zakresie metrologii ...

An approach to improve accuracy and productivity of industrial CMM measurements at high scanning speed

Aleksandar Arsovic
Marco Menoncin
Enrico Savio

June 2021

Proceeding - euspen’s 21st International Conference & Exhibition, Copenhagen, DK, June 2021EMPIR Gra...

University Erlangen-Nuremberg

Albert Weckenmann
Sebastian Beetz

January 2003

Abstract − The constant increase of the application ar-eas of coordinate metrology is due to the uni...

Metrology supporting the European regulation for radiation protection

Alves, João, G
Caldeira, Margarida, C
Röttger, Annette
Khanbabaee, Behnam
Adam-Guillermin, Christelle
Siiskonen, Teemu
Živanović, Miloš
Šabeta, Amra
Glavič-Cindro, Denis

November 2023

International audienceThe European Association of National Metrology Institutes (EURAMET) within its...

European Metrology Network for Advanced Manufacturing

2. A. Evans
A. Przyklenk
H. Bosse
V. Zeleny
D. Czułek
A. Balsamo
D. O’Connor
T. Yandayan
D. Phillips
F. Meli
C. S. Ragusa
O. Flys

January 2021

The progress of Advanced Manufacturing, which has been identified by the European Commission as a Ke...

Document specifying rules for the secure use of DCC covering legal aspects of metrology

Nikander, Pekka
Elo, Tommi
Mustapää, Tuukka
Kuosmanen, Petri
Hovhannisyan, Kristine
Maennel, Olaf
Brown, Clifford
Dawkins, John
Rhodes, Susan
Smith, Ian
Hutzschenreuter, Daniel
Weber, Henrike
Heeren, Wiebke
Schönhals, Shanna
Wiedenhöfer, Thomas

February 2020

This document will outline the "as-is" state of the existing European and international quality infr...

Comparison of PD Calibration Capabilities in Four National Metrology Institutes Down to 0.1 pC

Hällström, Jari
Havunen, Jussi
Bergman, Allan E.
Elg, Alf-Peter
Merev, Ahmet
Dedeoğlu, Serkan
Karaman, İsmail
Simón, Pascual
Rovira, Jorge
Garcia, Tomás
Garnacho, Fernando

June 2019

Per-Print of a paper accepted for presentation in the 21st International Symposium on High Voltage E...

Metrology for radiation protection: a new European network in the foundation phase

Röttger, Annette
Veres, Attila
Sochor, Vladimir
Pinto, Massimo
Derlacinski, Michal
Ioan, Mihail-Razvan
Sabeta, Amra
Bernat, Robert
Adam-Guillermin, Christelle
Alves, João
Glavič-Cindro, Denis
Bell, Steven
Wens, Britt
Persson, Linda
Živanović, Milos
Nylund, Reetta

November 2021

International audienceEuropean Metrology Networks are organized under the umbrella of EURAMET in ord...

The MeteoMet2 project:Highlights and results

Merlone, A.
Sanna, F.
Beges, G.
Bell, S.
Beltramino, G.
Bojkovski, J.
Brunet, M.
Del Campo, D.
Castrillo, A.
Chiodo, N.
Colli, M.
Coppa, G.
Cuccaro, R.
Dobre, M.
Drnovsek, J.
Ebert, V.
Fernicola, V.
Garcia-Benadí, A.
Garcia-Izquierdo, C.
Gardiner, T.
Georgin, E.
Gonzalez, A.
Groselj, D.
Heinonen, Martti
Hernandez, S.
Högström, Richard
Hudoklin, D.
Kalemci, M.
Kowal, A.
Lanza, L.
Miao, P.
Musacchio, C.
Nielsen, J.
Nogueras-Cervera, M.
Oguz Aytekin, S.
Pavlasek, P.
De Podesta, M.
Rasmussen, M. K.
Del-Río-Fernández, J.
Rosso, L.
Sairanen, Hannu
Salminen, Juho
Sestan, D.
Šindelářová, L.
Smorgon, D.
Sparasci, F.
Strnad, R.
Underwood, R.
Uytun, A.
Voldan, M.

January 2018

Launched in 2011 within the European Metrology Research Programme (EMRP) of EURAMET, the joint resea...

EUCOM -EVALUATING THE UNCERTAINTY IN COORDINATE METROLOGY: AN EMPIR (EU) PROJECT

Abstract

Extracted data

EUCOM -EVALUATING THE UNCERTAINTY IN COORDINATE METROLOGY: AN EMPIR (EU) PROJECT

Abstract

Extracted data

Related items

Related items