Conference paper entitled “Development of a Nondestructive Methodology based on Near Infrared Imaging for the Characterization of Damage in Transparent and Semi-Transparent Aircraft Components” presented in SPIE Smart Materials and Nondestructive Evaluation and Health Monitoring, 2018, Denver, Colorado, United State
The research work focuses on implementing intelligent measurement and diagnostic techniques for the ...
Infrared Thermography is commonly used in aircraft production and aerospace in general for the quali...
A millimeter and sub-millimeter continuous wave system has been used to image corrosion pitting, str...
Conference paper entitled “Novel Infrared Thermography Approach for Rapid Assessment of Damage in Ae...
<p>Composite materials are susceptible to barely visible impact damages (BVID) due to low-velocity i...
The use of near infrared signals for NDE measurements is described. It will be shown that such signa...
An integrated system between infrared vision and optical non-destructive testing techniques can be c...
FAA Technical Library2014PDFTech ReportUnited States. Department of Transportation. Federal Aviation...
An integrated system between infrared vision and optical non-destructive testing techniques can be c...
Recent advances in thermal imaging technology have spawned a number of new thermal NDE techniques th...
Recent advances in thermal imaging technology have spawned a number of new thermal NDE techniques th...
International audienceA study of two Non-destructive Testing methods (NDT) was carried out in specim...
Aeronautical structures are manufactured in a large range of materials like metallic, plastic or com...
International audienceA study of two Non-destructive Testing methods (NDT) was carried out in specim...
Nondestructive testing and inspection methods using infrared microscopy, X-ray television, and ultra...
The research work focuses on implementing intelligent measurement and diagnostic techniques for the ...
Infrared Thermography is commonly used in aircraft production and aerospace in general for the quali...
A millimeter and sub-millimeter continuous wave system has been used to image corrosion pitting, str...
Conference paper entitled “Novel Infrared Thermography Approach for Rapid Assessment of Damage in Ae...
<p>Composite materials are susceptible to barely visible impact damages (BVID) due to low-velocity i...
The use of near infrared signals for NDE measurements is described. It will be shown that such signa...
An integrated system between infrared vision and optical non-destructive testing techniques can be c...
FAA Technical Library2014PDFTech ReportUnited States. Department of Transportation. Federal Aviation...
An integrated system between infrared vision and optical non-destructive testing techniques can be c...
Recent advances in thermal imaging technology have spawned a number of new thermal NDE techniques th...
Recent advances in thermal imaging technology have spawned a number of new thermal NDE techniques th...
International audienceA study of two Non-destructive Testing methods (NDT) was carried out in specim...
Aeronautical structures are manufactured in a large range of materials like metallic, plastic or com...
International audienceA study of two Non-destructive Testing methods (NDT) was carried out in specim...
Nondestructive testing and inspection methods using infrared microscopy, X-ray television, and ultra...
The research work focuses on implementing intelligent measurement and diagnostic techniques for the ...
Infrared Thermography is commonly used in aircraft production and aerospace in general for the quali...
A millimeter and sub-millimeter continuous wave system has been used to image corrosion pitting, str...