Boosting the Efficiency: Unconventional Waveform Design for Efficient Wireless Power Transfer

Traditionally, wireless power is delivered through single-carrier, continuous-wave (CW) signals. Most research efforts to enhance the efficiency of wireless power transfer systems have been confined to the circuit-level design. However, in recent years, attention has been paid to the waveform design for wireless power transmission. It has been found that signals featuring a high peak-to-average power ratio (PAPR) can provide efficiency improvement when compared with CW signals. A number of approaches have been proposed, such as multisines/multicarrier orthogonal frequency division multiplex (OFDM) signals, chaotic signals, harmonicsignals, ultrawideband (UWB) signals, intermittent CW (ICW) signals, or white-noise signals. This article reviews these techniques with a focus on multisines/multicarrier signals, harmonic signals, and chaotic signals. A theoretical explanation for efficiency improvement is provided and accompanied by experimental results. Circuit design considerations are presented for the receiver side, and efficient transmission architectures are also described with an emphasis on spatial power combining.© 2015IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. Grant No: COST Action IC1301 Wireless Power Transmission for Sustainable Electronics (WIPE). Grant No: 2014 SGR 1551 (Generalitat de Catalunya)