Both hydrophilic-oleophobic and hydrophobic-oleophilic membranes were obtained by coating of the substrate of membranes, presented by stainless steel meshes with various dimensions of their openings, with a composition that forms the special type of their surface wettability via spray-coating method. The surface morphology of resulting membranes was studied using SEM, the type of their wettability was identified by measuring the contact angle between the surface of membrane and a drop of studied liquid (water or organic liquid) and efficiency of continuous separation of water and organic liquid was studied on self-assembled setup
This dissertation focuses on the use of nanofiltration membranes as a separation tool inorganic solv...
Controlled assembly of nanoscale building units to form special micro-/nanostructures is of interest...
For the efficient separation of lipid extracted from microalgae cells, a novel membrane was devised ...
Anumber of composite membranes have been investigated for the separation ofwater from miscible organ...
This article is focused on development of hydrophilic and oleophobic composition which serves as a c...
The fabrication of functionalized membranes with hydrophobic/oleophilic surfaces for the elimination...
Membrane distillation is a thermal separation technique using a microporous hydrophobic membrane. On...
For the first time pervaporation separation of miscible liquids have been investigated with three an...
The separation of miscible and immiscible liquid mixtures is one of the most widely utilized unit op...
Aim of the present work is the preparation of organic membranes with narrow pore size distribution a...
The oil/water mixture is sepearated and then treated, it can not only realize the reuse of oil and w...
The superhydrophobic composite membrane was successfully manufactured by a sol-gel method by dryin...
Polymeric nanomaterials, which have tuneable chemical structures, versatile functionalities, and goo...
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, ...
This thesis offers a comprehensive study into the development of composite membranes for Organic Sol...
This dissertation focuses on the use of nanofiltration membranes as a separation tool inorganic solv...
Controlled assembly of nanoscale building units to form special micro-/nanostructures is of interest...
For the efficient separation of lipid extracted from microalgae cells, a novel membrane was devised ...
Anumber of composite membranes have been investigated for the separation ofwater from miscible organ...
This article is focused on development of hydrophilic and oleophobic composition which serves as a c...
The fabrication of functionalized membranes with hydrophobic/oleophilic surfaces for the elimination...
Membrane distillation is a thermal separation technique using a microporous hydrophobic membrane. On...
For the first time pervaporation separation of miscible liquids have been investigated with three an...
The separation of miscible and immiscible liquid mixtures is one of the most widely utilized unit op...
Aim of the present work is the preparation of organic membranes with narrow pore size distribution a...
The oil/water mixture is sepearated and then treated, it can not only realize the reuse of oil and w...
The superhydrophobic composite membrane was successfully manufactured by a sol-gel method by dryin...
Polymeric nanomaterials, which have tuneable chemical structures, versatile functionalities, and goo...
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, ...
This thesis offers a comprehensive study into the development of composite membranes for Organic Sol...
This dissertation focuses on the use of nanofiltration membranes as a separation tool inorganic solv...
Controlled assembly of nanoscale building units to form special micro-/nanostructures is of interest...
For the efficient separation of lipid extracted from microalgae cells, a novel membrane was devised ...