Wet grinding of invertebrate bulk samples – a scalable and cost-efficient protocol for metabarcoding and metagenomics

Most metabarcoding protocols for invertebrate bulk samples start with sample homogenisation, followed by DNA extraction, amplification of a specific marker region, and sequencing. Many of the above-mentioned laboratory steps have been verified thoroughly and best practice strategies exist, yet, no clear recommendation for the basis of almost all metabarcoding studies exists: the homogenisation of samples itself. Two different categories of devices are typically used for homogenisation: bead mills or blenders. Both have upsides and downsides. Bead mills rely on single-use plastics and therefore produce a lot of waste and are expensive. In addition to that, processing times can go up to 30 minutes making them unsuitable for large-scale studies. Blenders can handle larger sample volumes in a shorter time, and be cleaned – yet suffer from an increased risk of cross-contamination. We aimed to develop a fast, robust, cheap, and reliable sample homogenisation protocol that overcomes limitations of both approaches, i.e. does not produce difficult to discard waste and avoid single-use plastics while reducing overall costs. We tested the performance of the new protocol using six size-sorted Malaise trap samples and six unsorted stream macroinvertebrate kick-net samples. We used 14 replicates per sample and included many negative controls at different steps of the protocol to quantify the impacts of i) insufficient homogenisation and ii) cross-contamination. Our results show that 3-min homogenisation is sufficient to recover about 80% of OTUs per sample in each replicate and that a non-hazardous DIY cleaning solution provides an effective and efficient way of cleaning. The improvements of the protocol in terms of speed, ease of handling, an overall reduction of costs as well as the documented reliability and robustness make it an important candidate for sample homogenisation after sampling in particular for large-scale and regulatory metabarcoding but also metagenomics biodiversity assessments and monitoring