Analysis of electromagnetic vibration forces in the elements of the stator mounting of the turbogenerator to the case under non-nominal modes of operation

1. Article In English: [Shevchenko Valentina V., Minko A.N., Strokous A.V. (2018) Analysis of electromagnetic vibration forces in the elements of the stator mounting of the turbogenerator to the case under non-nominal modes of operation / Electrical Engineering & Electromechanics (ISSN 2074-272X, eISSN 2309-3404), No.5, pp. 29-33. https://doi.org/10.20998/2074-272X.2018.5.05 and https://doi.org/10.5281/zenodo.2638320] Purpose. The purpose of the paper is to determine the value of additional electromagnetic forces (EMF) that are created by the fluxes of scattering of the back of the turbogenerator (TG) stator core in the elements of its fastening to the case when operating in non-nominal modes according to the vibration control data. Methodology. The paper used the theory of electromagnetic fields, the method of polynomial approximation, mathematical modeling in the MathCAD-2000 professional package and the provisions of the general theory of electrical machines. Results. Analytical and numerical calculations of additional EMF values are performed, which were created by the leakage fluxes of the back of the stator core in the elements of fastening of the TG to the case when operating in non-nominal modes, which is determined by the need for night unloading of the power system. The values of these TG forces are established with a change in the output and consumption of reactive power and with a change in voltage. Originality. For the first time for TGs operating in non-nominal modes, the estimation and calculation of additional EMF in the elements of the TG core fastening to the case are carried out, which are created by the leakage fluxes of the back of the stator core and supplement the action of the basic EMF. The definition of these forces is relevant, because turbogenerators of TPPs in Ukraine with a capacity of 200-300 MW are maneuvering capacities and solve the problem of maintaining the power factor of the power system. Practical value. It was found that if the TGs often operate in non-nominal modes, the wear of the stator core fastening systems to the case is more significant than in the case of their operation only in nominal modes. The obtained data will allow to more accurately determine the scope of repair work, draw up schedules for their implementation, determine the locations of the sensors for monitoring, and can be used at the design stage of new machines. Keywords: turbogenerators (TG), TG load mode, TG non-nominal mode, electromagnetic force, reactive power, TG stator core fastening unit. On the publisher site: journal - go to download, download pdf; article - go to download, download pdf. Cyberleninka. Journal on zenodo - download pdf. 2. Journal [Electrical Engineering & Electromechanics (ISSN 2074-272X, eISSN 2309-3404). - 2018, No.5. - 80 p. http://doi.org/10.5281/zenodo.2638321