Analisis Penentuan Konstruksi Tiang Berdasarkan Sudut Antartiang Saluran Udara Tegangan Menengah (SUTM) Terhadap Karakteristik Penghantar Listrik Pada Penyulang Lambangsari Menggunakan ArcGIS

Saluran Udara Tegangan Menengah (SUTM) is the cheapest construction for distribution of electric power at the same power. The main components in electricity distribution line construction are conductors, insulators, connecting equipment, and poles. In the Lambangsari feeder, there are a total of 109 poles, with 101 poles conforming to the standard and 8 poles not conforming to the standard based on the angle between the poles. There are still several poles on the electricity distribution line that have been installed but are not in accordance with the standards set by PT. Perusahaan Listrik Negara (PLN), especially on the suitability of the pole construction to the angle between the poles used. The consequences that can occur if the bend of the conductor is too small the angle of bend (the sharper the angle) can result in long-term physical damage to the conductor and the pole, temperature increases in the conductor, changes in current values, and power losses generated. The design of the electricity distribution line needs to be done carefully. Especially by paying attention to the geographical conditions of the area, the angle on the distribution line of electricity between the poles, the type of pole, the construction of the pole, and much more