The article presents the results of studies on the properties of compositions based on high-density polyethylene and modifying additives - molybdenum disulfide and alizarin. The main patterns of melt flow depending on the conditions and the presence of modifying additives are revealed
The rheology of solidifying high-density polyethylene (HDPE) is investigated. Experiments on an HDPE...
In the present work, rheological properties of HDPE samples were measured at temperatures of 150˚C, ...
<span lang="EN-US">Results of researches on reception of pastelike high-filled compositions and esti...
It was investigated influence on the character of the flow of polyethylene melts having rheological ...
In this article the correlation between the average molar mass and the melt flow rate (MFR) is achie...
The rheological properties of polysulfide (PPS) melts and composite materials based on them were inv...
In this study, the linear viscoelastic properties of two series of Ziegler-Natta and metallocene HDP...
This report is a compilation of the work carried out by different laboratories participating in the ...
This is the second edition of Melt Rheology and its Role in Plastics Processing, although the title ...
The article studied the physical and mechanical properties of filled polyethylene and polyamide comp...
In this study, polyethylenes of high melt flow index LDPE and a medium melt flow index HDPE were mel...
The flow behaviour of LDPE and its blends with linear LDPE (LLDPE) chemically modified with DCP was ...
Introduction. The demand for halogen-free fire-resistant compositions for the manufacture of fire-re...
SOLUTION AND MELT BEHAVIOUR OF HIGH-DENSITY POLYETHYLENE - Successive Solution Fractionation mechan...
In this article, the correlation between molecular microstructure and rheological behavior for three...
The rheology of solidifying high-density polyethylene (HDPE) is investigated. Experiments on an HDPE...
In the present work, rheological properties of HDPE samples were measured at temperatures of 150˚C, ...
<span lang="EN-US">Results of researches on reception of pastelike high-filled compositions and esti...
It was investigated influence on the character of the flow of polyethylene melts having rheological ...
In this article the correlation between the average molar mass and the melt flow rate (MFR) is achie...
The rheological properties of polysulfide (PPS) melts and composite materials based on them were inv...
In this study, the linear viscoelastic properties of two series of Ziegler-Natta and metallocene HDP...
This report is a compilation of the work carried out by different laboratories participating in the ...
This is the second edition of Melt Rheology and its Role in Plastics Processing, although the title ...
The article studied the physical and mechanical properties of filled polyethylene and polyamide comp...
In this study, polyethylenes of high melt flow index LDPE and a medium melt flow index HDPE were mel...
The flow behaviour of LDPE and its blends with linear LDPE (LLDPE) chemically modified with DCP was ...
Introduction. The demand for halogen-free fire-resistant compositions for the manufacture of fire-re...
SOLUTION AND MELT BEHAVIOUR OF HIGH-DENSITY POLYETHYLENE - Successive Solution Fractionation mechan...
In this article, the correlation between molecular microstructure and rheological behavior for three...
The rheology of solidifying high-density polyethylene (HDPE) is investigated. Experiments on an HDPE...
In the present work, rheological properties of HDPE samples were measured at temperatures of 150˚C, ...
<span lang="EN-US">Results of researches on reception of pastelike high-filled compositions and esti...
DOI
Add to ORKG