Influence of Atmospheric Air Plasma Pre-Treatment of Veneers on the Mechanical Properties and Stability of Beech Plywood

Wood-based sheet materials such as plywood, fiberboard, particleboard, and oriented strain board find applications in civil engineering, building technology, furniture manufacturing and many more. All these materials rely strongly on an effective bond formation between the resin and the wood base material, which gives rise to their mechanical performance and stability, as well as their resistance to moisture and liquids. In our study, we present the use of a commercial atmospheric air plasma system, which we used for the pretreatment of veneers of common beech (Fagus sylvatica L.) wood before formation of plywood boards. Plasma treatment parameters were optimized following the change in water contact angle. Two different stacking patterns were used for plasma-treated veneers. The time stability of the plasma modification was investigated by forming a second set of plywood boards 70 hours after plasma treatment of the respective veneers. The influence of the plasma treatment on mechanical properties was studied via bending and shear strength of the four sets of plasma-treated boards in comparison to a plywood out of the same veneer without plasma treatment. Water and moisture resistance were tested through water immersion and surface water resistance tests. Further, confocal laser scanning microscopy was used to determine changes of the surfaces’ morphologies