A REVIEW ON POWER SAVER ESTABLISHMENT FOR INDUSTRIAL AND COMMERCIAL PURPOSE

This paper is used for the purpose of power saving for industrial and commercial establishment. Power factor is defined increase as the ratio of real power to apparent power. Where real power is the time integral of the instantaneous power measured over a full period and the apparent power is simply the product of the RMS voltage and RMS current measured over the entire period. The time lag between the zero voltage pulse and zero current pulse duly generated by suitable operational dual amplifier circuits are fed to two interrupted a pins of the microcontroller where the program takes over to actuate appropriate number of relays at its output for bringing shunt capacitors into the load circuit to get the power factor till it reaches 0.97. Shunt capacitor ratio will be change a current and voltage due to the power efficiency define and power its changed a circuit power due to high and current. Measure a unit pulse count and current transformer due to show the rating and increasing power factor value will be change show the display which device perform like “LED BULB, BULB,MOTOR,AC,TV,REF,” all using this technique power factor increasing due to easily saving energy of a Power