ReFreeDrive - Deliverable 3.4: CR-IM Full Design Report (Including CAD) for Inner and Outer Rotor Designs (Executive Summary only)

ReFreeDrive - Deliverable 6.2: Induction Machine with Fabricated Copper Rotor for 75kW of operation (Executive Summary only)

Mario Vetuschi
Peter Walmsley

May 2021

Executive Summary corresponding to the ReFreeDrive project deliverable D6.2: "Induction machine with...

ReFreeDrive - Deliverable 8.1: Techno-economic evaluation and exploitation (Executive Summary only)

Cleef Thackwell
Maximilian Wilhelm

April 2021

Executive Summary corresponding to the ReFreeDrive project deliverable D8.1: "Techno-economic evalua...

ReFreeDrive - Deliverable 6.6: Induction Machine with Fabricated Copper Rotor for 200kW of operation (Executive Summary only)

Mario Vetuschi
Peter Walmsley

May 2021

Executive Summary corresponding to the ReFreeDrive project deliverable D6.6: "Induction machine with...

ReFreeDrive - Deliverable 4.3: PM SynRel Electro Magnetic Design Track1 / Track2 (Executive Summary only)

Abdenour Abdelli
Baptiste Chareyron
Benjamin Gaussens
André Nasr
Gianluca Zito

September 2019

Executive Summary corresponding to the ReFreeDrive project deliverable D4.3: "PM Synrel Electro Magn...

ReFreeDrive - Deliverable 4.2: SynRel Electro Magnetic Design Track1 / Track2 (Executive Summary only)

Marco Villani
Giuseppe Fabri

September 2019

Executive Summary corresponding to the ReFreeDrive project deliverable D4.2: "SynRel Electro Magneti...

ReFreeDrive - Deliverable 5.1: Application software for IM and Synrel motor control (Executive Summary only)

Marco Tursini
Giuseppe Fabri
Simone Paolini
Alexandre Battiston

September 2019

Executive Summary corresponding to the ReFreeDrive project deliverable D5.1: "Application software f...

ReFreeDrive - Deliverable 6.4: PM Synchronous Reluctance Motor for 75 kW of operation (Executive Summary only)

Matteo Benedetto
Marco Villani
Giuseppe Fabri
Andrea Credo

May 2021

Executive Summary corresponding to the ReFreeDrive project deliverable D6.4 PM Synchronous Reluctanc...

ReFreeDrive - Deliverable 5.2: High Power Range Electric Drive Design (Executive Summary only)

Alexandre Battiston
Misa Milosavljevic
Simone Paolini

September 2019

Executive Summary corresponding to the ReFreeDrive project deliverable D5.2: "High Power Range Elect...

ReFreeDrive - Deliverable 8.4: Plan for the Exploitation of Results, final draft (Executive Summary only)

Matteo Benedetto
Alicia Rodríguez
Manuel González
Jorge Velasco

April 2021

Executive Summary corresponding to the ReFreeDrive project deliverable D8.4: "Plan for the Exploitat...

ReFreeDrive - Deliverable 7.1: Motor testing results (Executive Summary only)

Alexandre Battiston
Adrien Gilson
Emmanuel Godefroy
Misa Milosavljevic
Gianluca Zito

February 2022

Executive Summary corresponding to the ReFreeDrive project deliverable D7.1: "Motor testing results

ReFreeDrive - Deliverable 6.3: Pure Synchronous Reluctance Motor for 75kW of operation (Executive Summary only)

Marco Villani
Giuseppe Fabri
Andrea Credo
Matteo Benedetto

April 2021

Executive Summary corresponding to the ReFreeDrive project deliverable D6.3: "Pure Synchronous Reluc...

ReFreeDrive - Deliverable 6.1: Induction Machine with Die-Casted Copper Rotor for 75kW of operation (Executive Summary only)

Mario Vetuschi
David Schmitz

April 2021

Executive Summary corresponding to the ReFreeDrive project deliverable D6.1: "Induction Machine with...

ReFreeDrive - Deliverable 8.3: Plan for the Exploitation of Results, first draft (Executive Summary only)

Diego Artioli
Claudia Bruni

September 2019

Executive Summary corresponding to the ReFreeDrive project deliverable D8.3: "Plan for the Exploitat...

ReFreeDrive - Deliverable 4.1: SynRel Preliminary Analysis (Executive Summary only)

Abdenour Abdelli
Baptiste Chareyron
Benjamin Gaussens
Gianluca Zito
Marco Villani
Claudia Bruni
Luciano Albini

September 2019

Executive Summary corresponding to the ReFreeDrive project deliverable D4.1: "SynRel Preliminary Ana...

ReFreeDrive - Deliverable 6.5: Induction Machine with Die-Casted Copper Rotor for 200kW of operation (Executive Summary only)

Mario Vetuschi
David Schmitz

May 2021

Executive Summary corresponding to the ReFreeDrive project deliverable D6.5: "Induction machine with...

ReFreeDrive - Deliverable 6.2: Induction Machine with Fabricated Copper Rotor for 75kW of operation (Executive Summary only)

Mario Vetuschi
Peter Walmsley

May 2021

Executive Summary corresponding to the ReFreeDrive project deliverable D6.2: "Induction machine with...

ReFreeDrive - Deliverable 8.1: Techno-economic evaluation and exploitation (Executive Summary only)

Cleef Thackwell
Maximilian Wilhelm

April 2021

Executive Summary corresponding to the ReFreeDrive project deliverable D8.1: "Techno-economic evalua...

ReFreeDrive - Deliverable 6.6: Induction Machine with Fabricated Copper Rotor for 200kW of operation (Executive Summary only)

Mario Vetuschi
Peter Walmsley

May 2021

Executive Summary corresponding to the ReFreeDrive project deliverable D6.6: "Induction machine with...

ReFreeDrive - Deliverable 4.3: PM SynRel Electro Magnetic Design Track1 / Track2 (Executive Summary only)

Abdenour Abdelli
Baptiste Chareyron
Benjamin Gaussens
André Nasr
Gianluca Zito

September 2019

Executive Summary corresponding to the ReFreeDrive project deliverable D4.3: "PM Synrel Electro Magn...

ReFreeDrive - Deliverable 4.2: SynRel Electro Magnetic Design Track1 / Track2 (Executive Summary only)

Marco Villani
Giuseppe Fabri

September 2019

Executive Summary corresponding to the ReFreeDrive project deliverable D4.2: "SynRel Electro Magneti...

ReFreeDrive - Deliverable 5.1: Application software for IM and Synrel motor control (Executive Summary only)

Marco Tursini
Giuseppe Fabri
Simone Paolini
Alexandre Battiston

September 2019

Executive Summary corresponding to the ReFreeDrive project deliverable D5.1: "Application software f...

ReFreeDrive - Deliverable 6.4: PM Synchronous Reluctance Motor for 75 kW of operation (Executive Summary only)

Matteo Benedetto
Marco Villani
Giuseppe Fabri
Andrea Credo

May 2021

Executive Summary corresponding to the ReFreeDrive project deliverable D6.4 PM Synchronous Reluctanc...

ReFreeDrive - Deliverable 5.2: High Power Range Electric Drive Design (Executive Summary only)

Alexandre Battiston
Misa Milosavljevic
Simone Paolini

September 2019

Executive Summary corresponding to the ReFreeDrive project deliverable D5.2: "High Power Range Elect...

ReFreeDrive - Deliverable 8.4: Plan for the Exploitation of Results, final draft (Executive Summary only)

Matteo Benedetto
Alicia Rodríguez
Manuel González
Jorge Velasco

April 2021

Executive Summary corresponding to the ReFreeDrive project deliverable D8.4: "Plan for the Exploitat...

ReFreeDrive - Deliverable 7.1: Motor testing results (Executive Summary only)

Alexandre Battiston
Adrien Gilson
Emmanuel Godefroy
Misa Milosavljevic
Gianluca Zito

February 2022

Executive Summary corresponding to the ReFreeDrive project deliverable D7.1: "Motor testing results

ReFreeDrive - Deliverable 6.3: Pure Synchronous Reluctance Motor for 75kW of operation (Executive Summary only)

Marco Villani
Giuseppe Fabri
Andrea Credo
Matteo Benedetto

April 2021

Executive Summary corresponding to the ReFreeDrive project deliverable D6.3: "Pure Synchronous Reluc...

ReFreeDrive - Deliverable 6.1: Induction Machine with Die-Casted Copper Rotor for 75kW of operation (Executive Summary only)

Mario Vetuschi
David Schmitz

April 2021

Executive Summary corresponding to the ReFreeDrive project deliverable D6.1: "Induction Machine with...

ReFreeDrive - Deliverable 8.3: Plan for the Exploitation of Results, first draft (Executive Summary only)

Diego Artioli
Claudia Bruni

September 2019

Executive Summary corresponding to the ReFreeDrive project deliverable D8.3: "Plan for the Exploitat...

ReFreeDrive - Deliverable 4.1: SynRel Preliminary Analysis (Executive Summary only)

Abdenour Abdelli
Baptiste Chareyron
Benjamin Gaussens
Gianluca Zito
Marco Villani
Claudia Bruni
Luciano Albini

September 2019

Executive Summary corresponding to the ReFreeDrive project deliverable D4.1: "SynRel Preliminary Ana...

ReFreeDrive - Deliverable 6.5: Induction Machine with Die-Casted Copper Rotor for 200kW of operation (Executive Summary only)

Mario Vetuschi
David Schmitz

May 2021

Executive Summary corresponding to the ReFreeDrive project deliverable D6.5: "Induction machine with...

ReFreeDrive - Deliverable 6.2: Induction Machine with Fabricated Copper Rotor for 75kW of operation (Executive Summary only)

Mario Vetuschi
Peter Walmsley

May 2021

Executive Summary corresponding to the ReFreeDrive project deliverable D6.2: "Induction machine with...

ReFreeDrive - Deliverable 8.1: Techno-economic evaluation and exploitation (Executive Summary only)

Cleef Thackwell
Maximilian Wilhelm

April 2021

Executive Summary corresponding to the ReFreeDrive project deliverable D8.1: "Techno-economic evalua...

ReFreeDrive - Deliverable 6.6: Induction Machine with Fabricated Copper Rotor for 200kW of operation (Executive Summary only)

Mario Vetuschi
Peter Walmsley

May 2021

Executive Summary corresponding to the ReFreeDrive project deliverable D6.6: "Induction machine with...

ReFreeDrive - Deliverable 3.4: CR-IM Full Design Report (Including CAD) for Inner and Outer Rotor Designs (Executive Summary only)

Abstract

Extracted data

ReFreeDrive - Deliverable 3.4: CR-IM Full Design Report (Including CAD) for Inner and Outer Rotor Designs (Executive Summary only)

Abstract

Extracted data

Related items

Related items