Intelligent fire detection and alert system using labVIEW

Fire detection systems are designed to discover fires and allow the safe evacuation of occupants as well as protecting the safety of emergency response personnel. This paper describes the design and development of a fire detection and alert system. Temperature and flame sensors are used to indicate the occurrence of fire. This work consists of two parts, which are transmitter and receiver, both using ZigBee wireless technology. Arduino Uno is used as the microcontroller at the transmitter part to control the sensor nodes and give alert when over temperature and flame are detected. At the transmitter, the collected data from the sensors are transmitted by an XBee module operated as router node. At the receiver side, an XBee coordinator module which is attached to a computer using USB to serial communication captured the data for further processing. In addition, an interactive and user-friendly Graphical User Interface (GUI) is developed. LabVIEW software is used to design the GUI which displays and analyze the possibility of fire happening. The system can display the fire location and provides early warning to allow occupants to escape the building safely