Effect of synthesis temperature on crystallinity, morphology and cell viability of nanostructured hydroxyapatite via wet chemical precipitation method: Effect of temperature on hydroxyapatite properties

Hydroxyapatite (HA) is the main natural mineral constituent of bones and is a good alternative for biomedical applications because it is osteoconductive, non-allergenic, and non-carcinogenic, which ensures high biocompatibility. A commonly used method for obtaining hydroxyapatite is the wet route, which is simple and low-cost, produces only water as a final residue, and provides HA with a crystallinity comparable to that of bone tissue, which favors its biocompatibility. Therefore, the objective of this work is to synthesize hydroxyapatite via the wet chemical precipitation method at different temperatures (4°C, 30°C, 50°C, or 70°C) to observe the influence of temperature on crystallinity, morphology, and cytotoxicity. The results of X-ray diffraction show that all syntheses resulted in pure hydroxyapatite, while increasing the temperature led to higher crystallinity (10.6% to 56.2%) and the crystal size was slightly affected. The increase in temperature changed the particle shape from irregular to needle-like. Cell viability was tested by PicoGreen® in VERO cells for samples at concentrations of 30 and 300µg/mL, and the samples synthesized at 4°C, with lower crystallinity, caused less DNA damage to cells compared to the negative control. &nbsp