INFLUENCE OF SOME WINDING PARAMETERS ON HAIRINESS OF YARN AFTER WINDING PROCESS

Hairiness is an important quality parameter of yarn after winding process. It affects not only the quality of yarn, but also the productivity of the warping, weaving, knitting machines as well as the quality of produced fabrics. Hairiness is influenced by the factors of raw materials, technology and equipment at all stages of yarn production. This article presents the results of experimental research on the simultaneous influence of four typical winding parameters, including: Winding speed (Z1), the load on the friction discs of the yarn tensioner (Z2), the distance between the bobbin and the yarn guide (Z3) and the pressure of package on the grooved drum (Z4) to the increasing percentage of the hairiness of the yarns after winding compared to that before winding. Yarn hairiness was measured by Uster tester 5. By using the second-order orthogonal experimental planning, together with the support of Excel 2019 and Design Expert 11 software, an experimental matrix and mathematical models describing the relationship between the four winding parameters and increasing percentage of the hairiness of three types of yarn (carded Ne 31/1 CVCD, combed Ne 30/1 CVCM, combed Ne 30/1 COCM) are established. The research result is the scientific basis for selecting the optimal winding parameters in order to achieve the required increase in hairiness of the yarn after winding or predict hairiness increase of the yarns before winding