Validation of the deployment in the straight silicone mock vessel: (a) measurements of the outer diameter (OD); (b) qualitative comparison of the deployed configuration.</p
<p>Relation between compressibility indices (CIs) measured using a 3D-PMD device and elongation indi...
<p>Each colored line represents the diameter data obtained from each sensor. The bag was inflated an...
<p>(a) FPFDM replicates the characteristic vessel size dependence of ΔR<sub>2</sub><sup>*</sup>and Δ...
Validation of stent deployment in the 3D-printed patient-specific vessels: comparison of the deploym...
Calibration of materials used for the mock vessels: (a) experimental and computational stress-strain...
: This study aims at proposing and discussing useful indications to all those who need to validate a...
A set of bare hull resistance tests were performed on a 1/8 scale model of an 11.8 m long planing hu...
(a) Comparison of patient-specific geometries as 3D-printed resin vessels (top) and FE model (bottom...
Calculation verification on deployment simulation: effects on prediction of inner lumen diameter due...
<p>Top Left: the six pre-defined positions in the phantom. Top Right: a photo of the system calibrat...
The Shipyard Test of Naval Combat System depends on external factors, such as weather conditions and...
<p>A: Schematic drawing of the experimental set-up; B: Finite element model with the contact region ...
In the context of marine application of computational fluid dynamic (CFD), it is well known that the...
There is a significant market pull and technology push to incorporate computational fluid dynamics...
This paper presents some outcomes from a four years (2013 – 2016) long research project investigatin...
<p>Relation between compressibility indices (CIs) measured using a 3D-PMD device and elongation indi...
<p>Each colored line represents the diameter data obtained from each sensor. The bag was inflated an...
<p>(a) FPFDM replicates the characteristic vessel size dependence of ΔR<sub>2</sub><sup>*</sup>and Δ...
Validation of stent deployment in the 3D-printed patient-specific vessels: comparison of the deploym...
Calibration of materials used for the mock vessels: (a) experimental and computational stress-strain...
: This study aims at proposing and discussing useful indications to all those who need to validate a...
A set of bare hull resistance tests were performed on a 1/8 scale model of an 11.8 m long planing hu...
(a) Comparison of patient-specific geometries as 3D-printed resin vessels (top) and FE model (bottom...
Calculation verification on deployment simulation: effects on prediction of inner lumen diameter due...
<p>Top Left: the six pre-defined positions in the phantom. Top Right: a photo of the system calibrat...
The Shipyard Test of Naval Combat System depends on external factors, such as weather conditions and...
<p>A: Schematic drawing of the experimental set-up; B: Finite element model with the contact region ...
In the context of marine application of computational fluid dynamic (CFD), it is well known that the...
There is a significant market pull and technology push to incorporate computational fluid dynamics...
This paper presents some outcomes from a four years (2013 – 2016) long research project investigatin...
<p>Relation between compressibility indices (CIs) measured using a 3D-PMD device and elongation indi...
<p>Each colored line represents the diameter data obtained from each sensor. The bag was inflated an...
<p>(a) FPFDM replicates the characteristic vessel size dependence of ΔR<sub>2</sub><sup>*</sup>and Δ...
DOI
Add to ORKG