Electric Powertrain Topology Analysis and Design for Heavy-Duty Trucks

Powertrain system design optimization is an unexplored territory for battery electric trucks, which only recently have been seen as a feasible solution for sustainable road transport. To investigate the potential of these vehicles, in this paper, a variety of new battery electric powertrain topologies for heavy-duty trucks is studied. Thereby, topological design considerations are analyzed related to having: (a) a central or distributed drive system (individually-driven wheels); (b) a single or a multi-speed gearbox; and finally, (c) a single or multiple electric machines. For reasons of comparison, each concurrent powertrain topology is optimized using a bilevel optimization framework, incorporating both powertrain components and control design. The results show that the combined choice of powertrain topology and number of gears in the gearbox can result in a 5.6% total-cost-of-ownership variation of the vehicle and can, significantly, influence the optimal sizing of the electric machine(s). The lowest total-cost-of-ownership is achieved by a distributed topology with two electric machines and two two-speed gearboxes. Furthermore, results show that the largest average reduction in total-cost-of-ownership is achieved by choosing a distributed drive over a central drive topology (-1.0%); followed by using a two-speed gearbox over a single speed (-0.6%); and lastly, by using two electric machines over using one for the central drive topologies (-0.3%)