An investigation was made into the Bi(Mg0.75W0.25)O3–PbTiO3 (BMW-PT) system. The aim was to find the optimum composition with respect to piezoelectric and dielectric properties and link this to the presence of a morphotropic phase boundary (MPB). The optimum composition was found to be 62 mol% PT. The maximum values of the piezoelectric constant d33 = 150 pm/V and the maximum relative dielectric constant 33/0 = 1400. The dielectric loss is high with tan d typically 5%. Results from capacity versus the temperature measurements indicate a Curie temperature of 220 °C, which is significantly lower than the predicted value
(0.98 - x)Bi(Sc3/4In1/4)O-3-xPbTiO(3)-0.02Pb(Mg1/3Nb2/3)O-3 (BSI-xPT-PMN, x = 0.56-0.60) ternary sol...
The piezoelectric and ferroelectric properties of ceramics in the (1-x)[0.35Bi(Mg1/2Ti1/2)O-3-0.3BiF...
The phase diagram of the (Pb0.85Sm0.10)(Ti0.98Mn0.02)O3 - BiFeO3 system was studied by measuring the...
An investigation was made into the Bi(Mg0.75W0.25)O3–PbTiO3 (BMW-PT) system. The aim was to find the...
An investigation was made into the Bi(Mg0.75W0.25)O3–PbTiO3 (BMW-PT) system. The aim was to find the...
An investigation was made into the Bi(Mg0.75W0.25)O3–PbTiO3 (BMW-PT) system. The aim was to find the...
An investigation was made into the Bi(Mg0.75W0.25)O3–PbTiO3 (BMW-PT) system. The aim was to find the...
An investigation was made into the (1−x)Bi(MgTi)0.5O3¿xPbTiO3 (BMT-PT) system. The aim was to find t...
An investigation was made into the (1−x)Bi(MgTi)0.5O3¿xPbTiO3 (BMT-PT) system. The aim was to find t...
An investigation was made into the (1−x)Bi(MgTi)0.5O3¿xPbTiO3 (BMT-PT) system. The aim was to find t...
An investigation was made into the (1−x)Bi(MgTi)0.5O3¿xPbTiO3 (BMT-PT) system. The aim was to find t...
An investigation was made into the (1−x)Bi(MgTi)0.5O3¿xPbTiO3 (BMT-PT) system. The aim was to find t...
According to consideration on the average radius of B-site cation of BiMeO3, we reported that the Bi...
Piezoelectric ceramic (1 - x)Bi(Sc3/4In1/4)O-3-xPbTiO(3) (BSIPT) (0.45 <= x <= 0.70) solid sol...
New morphotropic phase boundary (MPB) piezoelectrics, with ferroelectric phase transition (T-c) exce...
(0.98 - x)Bi(Sc3/4In1/4)O-3-xPbTiO(3)-0.02Pb(Mg1/3Nb2/3)O-3 (BSI-xPT-PMN, x = 0.56-0.60) ternary sol...
The piezoelectric and ferroelectric properties of ceramics in the (1-x)[0.35Bi(Mg1/2Ti1/2)O-3-0.3BiF...
The phase diagram of the (Pb0.85Sm0.10)(Ti0.98Mn0.02)O3 - BiFeO3 system was studied by measuring the...
An investigation was made into the Bi(Mg0.75W0.25)O3–PbTiO3 (BMW-PT) system. The aim was to find the...
An investigation was made into the Bi(Mg0.75W0.25)O3–PbTiO3 (BMW-PT) system. The aim was to find the...
An investigation was made into the Bi(Mg0.75W0.25)O3–PbTiO3 (BMW-PT) system. The aim was to find the...
An investigation was made into the Bi(Mg0.75W0.25)O3–PbTiO3 (BMW-PT) system. The aim was to find the...
An investigation was made into the (1−x)Bi(MgTi)0.5O3¿xPbTiO3 (BMT-PT) system. The aim was to find t...
An investigation was made into the (1−x)Bi(MgTi)0.5O3¿xPbTiO3 (BMT-PT) system. The aim was to find t...
An investigation was made into the (1−x)Bi(MgTi)0.5O3¿xPbTiO3 (BMT-PT) system. The aim was to find t...
An investigation was made into the (1−x)Bi(MgTi)0.5O3¿xPbTiO3 (BMT-PT) system. The aim was to find t...
An investigation was made into the (1−x)Bi(MgTi)0.5O3¿xPbTiO3 (BMT-PT) system. The aim was to find t...
According to consideration on the average radius of B-site cation of BiMeO3, we reported that the Bi...
Piezoelectric ceramic (1 - x)Bi(Sc3/4In1/4)O-3-xPbTiO(3) (BSIPT) (0.45 <= x <= 0.70) solid sol...
New morphotropic phase boundary (MPB) piezoelectrics, with ferroelectric phase transition (T-c) exce...
(0.98 - x)Bi(Sc3/4In1/4)O-3-xPbTiO(3)-0.02Pb(Mg1/3Nb2/3)O-3 (BSI-xPT-PMN, x = 0.56-0.60) ternary sol...
The piezoelectric and ferroelectric properties of ceramics in the (1-x)[0.35Bi(Mg1/2Ti1/2)O-3-0.3BiF...
The phase diagram of the (Pb0.85Sm0.10)(Ti0.98Mn0.02)O3 - BiFeO3 system was studied by measuring the...