Thermodn. of Ti-O interaction in the Ti-Al2O3 diffusion couples and in liq. Ag-Cu alloys were studied. In spite of strong Ti-O interaction in the Ti-Al2O3 diffusion couples Ti-oxides are not formed due to dissolved aluminum. Results indicate that there is a large liq. miscibility gap in the Ag-Cu-Ti system, which divides the liq. into high-Ti and low-Ti, high Ag solns. In Ag-rich Ag-Cu-Ti alloys a-Ti[O] or lower Ti-oxides may form due to high oxygen and Ti activities. Several other phase equil. and the isoactivities of dissolved Ti and O in both systems are presented. The present thermodn. description gives a good basis for further studies on chem. interactions in diffusion bonded or in brazed oxide-metals joints. [on SciFinder (R)
Oxygen ingress into technical Ti-alloys during high temperature exposure in oxygen containing enviro...
Isothermal oxidation testing of near α titanium alloys VT18U, VT20, Ti6Al7Nb and Ti6242S was perform...
The diffusion coefficient of oxygen in beta-Ti has been measured by the molten flux method in the te...
Thermodn. of Ti-O interaction in the Ti-Al2O3 diffusion couples and in liq. Ag-Cu alloys were studie...
The product layer sequence in the reaction of solid Ti with alumina and in the reaction of Ti dissol...
A diffusion reaction between titanium and aluminium oxide was examined at 900°C and 1100°C under vac...
Brazing of titanium provides a joining technique suitable for the fabrication of highly-loaded aeros...
International audienceThis work reexamines the insertion of O atoms in the L10 γ-TiAl system using f...
ReaCfions between Ti and AI2O3 were studied in planar joined diffusion couples at 1100°C. Isothermal...
The interfacial reactions between two commercially available Ag–Cu–Ti-based active braze alloys and...
The study deals with monocrystals of alpha -titanium and titanium - oxygen alloys. The aim is to dev...
Individually, increasing the concentration of either oxygen or aluminum has a deleterious effect on ...
Ti and its alloys are widely used as biomaterials. Their main properties are excellent corrosion res...
In the present investigation, silver and copper base alloys with varying compositions of Ag:Cu =...
International audienceSmall addition of oxygen is currently used to improve the mechanical propertie...
Oxygen ingress into technical Ti-alloys during high temperature exposure in oxygen containing enviro...
Isothermal oxidation testing of near α titanium alloys VT18U, VT20, Ti6Al7Nb and Ti6242S was perform...
The diffusion coefficient of oxygen in beta-Ti has been measured by the molten flux method in the te...
Thermodn. of Ti-O interaction in the Ti-Al2O3 diffusion couples and in liq. Ag-Cu alloys were studie...
The product layer sequence in the reaction of solid Ti with alumina and in the reaction of Ti dissol...
A diffusion reaction between titanium and aluminium oxide was examined at 900°C and 1100°C under vac...
Brazing of titanium provides a joining technique suitable for the fabrication of highly-loaded aeros...
International audienceThis work reexamines the insertion of O atoms in the L10 γ-TiAl system using f...
ReaCfions between Ti and AI2O3 were studied in planar joined diffusion couples at 1100°C. Isothermal...
The interfacial reactions between two commercially available Ag–Cu–Ti-based active braze alloys and...
The study deals with monocrystals of alpha -titanium and titanium - oxygen alloys. The aim is to dev...
Individually, increasing the concentration of either oxygen or aluminum has a deleterious effect on ...
Ti and its alloys are widely used as biomaterials. Their main properties are excellent corrosion res...
In the present investigation, silver and copper base alloys with varying compositions of Ag:Cu =...
International audienceSmall addition of oxygen is currently used to improve the mechanical propertie...
Oxygen ingress into technical Ti-alloys during high temperature exposure in oxygen containing enviro...
Isothermal oxidation testing of near α titanium alloys VT18U, VT20, Ti6Al7Nb and Ti6242S was perform...
The diffusion coefficient of oxygen in beta-Ti has been measured by the molten flux method in the te...