Efficient hybrid solar cells from zinc oxide nanoparticles and a conjugated polymer

The authors show that efficient bulk-heterojunction solar cells can be made using ZnO nanoparticles and a conjugated polymer. These cells can be processed from soln. and exhibit an incident photon to current conversion efficiency up to 40 %. Nanocryst. ZnO (nc-ZnO) of approx. 5 nm diam. was synthesized and used. As the n-type semiconductor. Complexes with MDMO-PPV were used, with Aluminum and a PEDOT-PSS/ITO-coated glass hole-conducting electrode. The incident photon to current conversion efficiency (IPCE)closely resembles the absorption spectrum of the MDMO-PPV:nc-ZnO layer on glass, and reaches a value of 40 % at the absorption max. MDMO-PPV. Integration of this spectral response with the solar spectrum (AM1.5G, normalized 100 mW cm-2) affords an est. of the short-circuit c.d. of Jsc = 3.3 mA/cm2 under AM1.5 (1 sun) conditions. C.d.-voltage (J-V) measurements, carried out in the dark reveal excellent diode behavior, with electron current dominating the c.d. in forward bias. TEM micrographs showed intimate mixing of the ZnO and the MDMO-PPV, with the majority of the polymer domains smaller than a few tens of nanometers, which has been shown to be the exciton diffusion length in a similar PPV polymer