Green penetration dyeing of wool yarn with natural dye mixtures in D5 medium

This investigation reported a mixture of natural dyes by employing the D5 solvent as a green penetration dyeing system for wool fiber. The ideal dyeing conditions were determined by conducting an in-depth analysis of the following variables: AEO-3 concentration, aqueous pick-up rate, solution pH, dyeing time, temperature, dye mass, and dye fixation percentage. Tensile strength and elongation were measured to learn more about the mechanical characteristics of the wool yarn after it was dyed in D5 solvent and water. The suggested dyeing parameters for wool yarn are 2% of AEO-3, 400% of the wool aqueous pick-up rate at pH 3, 90 °C temperature, and 90-minute duration. This was determined by calculating the K/S value and the dye fixing rate. A washfastness of 4–5 on the fading scale and a stainfastness of 5 across the board were acquired. MR and GB dyes obtained a high dye fixation rate within 90 to 100 %; however, GY dye achieved about 50 % dye fixation rate. X-ray diffraction (XRD) patterns and thermogravimetric analysis (TGA) verified that the original and dyed wool fiber showed no change in interplanar distance in crystallinity and stable thermal tendency due to the dyeing process. The morphology of the wool's surface was not altered throughout the dyeing process, and the colors were spread uniformly over the fiber in SEM pictures and cross-sections. Finally, natural dyes in a D5 solvent media may be used to produce a ternary colour, laying the groundwork for natural dyes to be further industrialized