[EN] Zr-containing UiO-66 materials are active and reusable heterogeneous catalysts for the selective ketalization of levulinic acid (LA) with 1,2-propanediol, affording selectivities of up to 91-93% at full LA conversion, with very low levels of ester or ketal-ester byproducts. This allows the preparation of the target ketal directly from LA and avoiding intermediate esterification steps of LA to levulinate esters to minimize the formation of unwanted side products. The catalytic activity of UiO-66 is found to depend critically on the hydration degree of the solid and the amount of missing linker defects. The most likely active sites for ketalization in (defective) UiO-66 are Bronsted-induced acid sites arising from the strong coordination...
Converting biomass into value-added chemicals holds the key to sustainable long-term carbon resource...
A cascade strategy for the catalytic valorization of aqueous solutions of levulinic acid as well as ...
Zirconia nanomaterials were prepared by impregnation of KIL-2 type silica with 4, 8, 15 and 25 wt% o...
[EN] Zr-containing UiO-66 materials are active and reusable heterogeneous catalysts for the selectiv...
Zr-containing metal-organic frameworks (MOFs) formed by either terephthalate (UiO-66) or 2-aminotere...
[EN] Zr-containing UiO-66 and MOF-808 are evaluated for converting levulinic acid (LA) into gamma-va...
Zr-containing UiO-66 and MOF-808 are evaluated for converting levulinic acid (LA) into γ-valerolacto...
The massive use of petroleum and its possible exhaustion are driving the current researchtrend to st...
The massive use of petroleum and its possible exhaustion are driving the current research trend to s...
The non-edible Biomass is an abundant and relatively cheap carbon source that can be quickly reinteg...
Abstract: Condensation reactions of levulinic acid (LA) with 1,2-ethanediol (1,2-ED), 1,2-propanedio...
Esters of levulinic acid, which is biomass derived, are used as oxygenated additives in fuels, flavo...
Commercially available Purolite CT151 demonstrated to be an efficient acid catalyst for the synthesi...
At present, the trend towards partial replacement of petroleum‐derived fuels by those from the reval...
Partially and fully sulfonated UiO66 derivatives, along with the non-functionalized MOF, were synthe...
Converting biomass into value-added chemicals holds the key to sustainable long-term carbon resource...
A cascade strategy for the catalytic valorization of aqueous solutions of levulinic acid as well as ...
Zirconia nanomaterials were prepared by impregnation of KIL-2 type silica with 4, 8, 15 and 25 wt% o...
[EN] Zr-containing UiO-66 materials are active and reusable heterogeneous catalysts for the selectiv...
Zr-containing metal-organic frameworks (MOFs) formed by either terephthalate (UiO-66) or 2-aminotere...
[EN] Zr-containing UiO-66 and MOF-808 are evaluated for converting levulinic acid (LA) into gamma-va...
Zr-containing UiO-66 and MOF-808 are evaluated for converting levulinic acid (LA) into γ-valerolacto...
The massive use of petroleum and its possible exhaustion are driving the current researchtrend to st...
The massive use of petroleum and its possible exhaustion are driving the current research trend to s...
The non-edible Biomass is an abundant and relatively cheap carbon source that can be quickly reinteg...
Abstract: Condensation reactions of levulinic acid (LA) with 1,2-ethanediol (1,2-ED), 1,2-propanedio...
Esters of levulinic acid, which is biomass derived, are used as oxygenated additives in fuels, flavo...
Commercially available Purolite CT151 demonstrated to be an efficient acid catalyst for the synthesi...
At present, the trend towards partial replacement of petroleum‐derived fuels by those from the reval...
Partially and fully sulfonated UiO66 derivatives, along with the non-functionalized MOF, were synthe...
Converting biomass into value-added chemicals holds the key to sustainable long-term carbon resource...
A cascade strategy for the catalytic valorization of aqueous solutions of levulinic acid as well as ...
Zirconia nanomaterials were prepared by impregnation of KIL-2 type silica with 4, 8, 15 and 25 wt% o...