A Millimeter-Wave CMOS Series-Doherty Power Amplifier With Post-Silicon Inter-Stage Passive Validation

This article presents a wideband series-Doherty power amplifier (SDPA) for millimeter-wave (mm-wave) fifth-generation (5G) applications. It features a compact two-step impedance inverting-based series-Doherty power combiner that provides broadband close-to-perfect power back-off (PBO) efficiency enhancement. The amplitude-to-amplitude (AM-AM)/amplitude-to-phase (AM-PM) performance of the load-modulated Doherty power amplifier for broadband operation is analyzed. We also devise a post-silicon inter-stage passive validation (PSIV) approach to evaluate the mm-wave chip prototype utilizing the embedded voltage root mean square detectors. The proposed SDPA is realized in a 40-nm bulk CMOS, and it delivers 20.4 dBm PSAT with 39.1%/34% PAE at 0-/6-dB PBO. Over a 23.5-30 GHz band, its PAE is >24% at 6-dB PBO. At 27 GHz, applying a '2 GHz 16-quadratic-amplitude modulation (QAM) orthogonal frequency-division multiplexing (OFDM)' signal, the proposed SDPA generates 10.2 dBm average power with 18.9% average PAE. The average error vector magnitude is better than -24.5 dB without digital predistortion for a '400-MHz 64-QAM OFDM' signal while generating an average output power of 8.8 dBm with 15% PAE. The AM-AM/AM-PM of the realized SDPA is investigated by employing a '50-MHz 64-QAM OFDM' signal, validating our analysis and showing that the linearity limitation of DPAs is systematic and predictable. Utilizing the proposed PSIV approach, the frequency response of the input/inter-stage passive circuits is measured, indicating an excellent agreement with 3-D electromagnetic (EM) simulation results.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Electronic