Modeling of Cyclic Deformation of Sandstones Based on Experimental Observations

Underground energy storage (UES) in porous and cavity reservoirs can be used to balance the mismatch between the production and demand of renewable energy. Understanding the geomechanical behaviour of these reservoirs under different storage conditions, i.e., storage frequency and fluid pressure, is key in defining their capacity and effective lifetime. This work presents an analysis performed on sandstones to unravel their geomechanical response under cyclic loading. It includes, importantly, both experimental and numerical investigations under deviatoric stress conditions below the rock dilatant cracking threshold. From the experimental point of view, axial strains and acoustic emissions indicated that inelastic strains accumulated cycle after cycle, following a decreasing rate per cycle. Four types of deformations were interpreted: elastic, viscoelastic, plastic, and cyclic-plastic. Based on these experimental results and observations, the Modified Cam-clay model was extended to account for cyclic plastic deformations and the Kelvin-Voigt model was used to model visco-elasticity. This approach can be used to study cyclic sandstone deformation’s implications on subsidence, fault reactivation, and cap rock flexure, among other physical phenomena impacting a reservoir’s storage capacity.Green Open Access added to TU Delft Institutional Repository 'You share, we take care!' - Taverne project https://www.openaccess.nl/en/you-share-we-take-care Otherwise as indicated in the copyright section: the publisher is the copyright holder of this work and the author uses the Dutch legislation to make this work public.Applied Geophysics and PetrophysicsReservoir Engineerin