Pyrolysis gas from polyolefinic plastic waste is a hydrocarbon-rich feedstock for sustainable syngas production. The effect of Cr, Mo, and W promoters on the activity of gasification slag-supported Ni catalysts during the reforming of plastic pyrolysis gas was investigated (polyethylene and polypropylene mixed feedstock, Ni:promoter molar ratio = 4.5, 800 °C, steam-To-carbon molar ratio of 7). Based on 3 h reforming tests, all catalysts showed stable conversion efficiency, suggesting that gasification slag from municipal solid waste is a promising replacement material for traditionally used alumina supports. Moreover, the slag demonstrated good thermal stability and potential for catalyst recycling, justifying the economic benefit of valori...
Pyrolytic char is widely used for tar removal due to its cost-effective and eco-friendly. In this wo...
Pyrolytic char is widely used for tar removal due to its cost-effective and eco-friendly. In this wo...
Hydrocarbon reforming using CO2, a greenhouse gas, as a feedstock has attracted increasing attention...
Humanity reliance on plastic has led to the current problem of dealing with the waste that is genera...
Three Ni/Al2O3catalysts prepared by co-precipitation, impregnation and sol-gel methods were investig...
Summarization: Nickel-based catalysts were synthesized using gasification slag as an abundant and in...
Tar formation during biomass gasification is a major barrier to utilise the produced syngas, which c...
Syngas production (H2 and CO) from carbon dioxide reforming of high density polyethylene (HDPE) over...
Summarization: The catalytic performance of supported Ni catalysts for the propane steam reforming r...
Catalytic steam reforming of waste high density polyethylene for the production of hydrogen/syngas h...
Carbon nanotubes were produced from post-consumer mixed waste plastics using a pyrolysis-catalysis p...
A steady increase in atmospheric carbon dioxide (CO2) and methane concentrations in recent decades h...
Thermal processing is an effective technique for recycling waste plastics in a sustainable way. The ...
The development of high performance and low-cost catalyst is very important to remove tar during bio...
This research work was conducted in three main phases. In the first phase, Ni and Co monometallic an...
Pyrolytic char is widely used for tar removal due to its cost-effective and eco-friendly. In this wo...
Pyrolytic char is widely used for tar removal due to its cost-effective and eco-friendly. In this wo...
Hydrocarbon reforming using CO2, a greenhouse gas, as a feedstock has attracted increasing attention...
Humanity reliance on plastic has led to the current problem of dealing with the waste that is genera...
Three Ni/Al2O3catalysts prepared by co-precipitation, impregnation and sol-gel methods were investig...
Summarization: Nickel-based catalysts were synthesized using gasification slag as an abundant and in...
Tar formation during biomass gasification is a major barrier to utilise the produced syngas, which c...
Syngas production (H2 and CO) from carbon dioxide reforming of high density polyethylene (HDPE) over...
Summarization: The catalytic performance of supported Ni catalysts for the propane steam reforming r...
Catalytic steam reforming of waste high density polyethylene for the production of hydrogen/syngas h...
Carbon nanotubes were produced from post-consumer mixed waste plastics using a pyrolysis-catalysis p...
A steady increase in atmospheric carbon dioxide (CO2) and methane concentrations in recent decades h...
Thermal processing is an effective technique for recycling waste plastics in a sustainable way. The ...
The development of high performance and low-cost catalyst is very important to remove tar during bio...
This research work was conducted in three main phases. In the first phase, Ni and Co monometallic an...
Pyrolytic char is widely used for tar removal due to its cost-effective and eco-friendly. In this wo...
Pyrolytic char is widely used for tar removal due to its cost-effective and eco-friendly. In this wo...
Hydrocarbon reforming using CO2, a greenhouse gas, as a feedstock has attracted increasing attention...