A fully polymeric micropump with piezoelectric actuator

This paper presents a new concept of designing and fabricating polymeric micropumps. The micro pump is made of SU-8 photoresist and polymethylmethacrylate (PMMA). The key elements of the micropump are the micro check valves, which are fabricated in a 100-μm-thick SU-8 film. The SU-8 part is designed as a disc with 10-mm diameter. The check valves are 1-mm discs suspended on a compliant orthoplanar spring with four arms. The cross section of the spring beam has a dimension of μm. The pump is designed as a stack of different layers, which are made of PMMA and SU-8. In contrast to their silicon counterparts, the low spring constant of the SU-8 check valves allows the use of relatively low drive voltages on the order of several 10 V for the piezodisc, which works as the pump’s actuator. Pump rates up to 1 ml/min and back pressures up to 200 mm water have been achieved. The pump design shows the feasibility of our current effort to make microfluidic systems based on the lamination of different polymeric materials.Accepted versio