Increasing concern on health related effects related due to inhalation of diesel particulates has led to increasingly stringent legislation on particulate emissions from diesel-powered vehicles. At present, the conventional filtration method specified by the US Environmental Protection Agency (EPA) is used to determine particulate emissions gravimetrically which is integrated over a transient test cycle. But this time-consuming and labor-intensive method cannot produce real-time particulate measurements, especially during the transient engine operations. Therefore, the development of real-time particulate measurement techniques is crucial not only in providing an alternative to the tedious and time-consuming dilution tunnel procedure but al...
The U.S. Bureau of Mines and others have conducted a number of occupational exposure surveys since t...
The objective of this project was to measure and characterize particulate emissions from light-duty ...
A gasoline direct injection engine was set-up to operate with a dynamometer in a test cell. Test cyc...
Increasing concern on health related effects related due to inhalation of diesel particulates has le...
Air pollution caused by diesel engine emissions, especially particulate matters and nitric oxides em...
This report presents the work on the development of a new technique capable of measuring the particu...
A primary means to reduce environmental levels of diesel particulate matter (DPM) exposure to miners...
This paper reports our efforts to develop an instrument, TG-1, to measure particulate emissions from...
The new BS-VI norms which will bring down the NOx, HC & PM values for diesel and petrol engines.For ...
A diesel particulate matter analyzer capable of direct, real-time measurement of engine exhaust part...
Diesel engine emissions are highly complex mixtures. They consist of a wide range of organic and ino...
The objective of this study is to discern and characterize the factors contributing to the variabili...
Using a sampling method of particulate matter (PM) without the use of a dilution tunnel allows for e...
Diesel and gasoline engines face tightening particulate matter emissions regulations due to the envi...
Portable Emissions Measurement Systems (PEMS) are becoming part of the emissions control regulations...
The U.S. Bureau of Mines and others have conducted a number of occupational exposure surveys since t...
The objective of this project was to measure and characterize particulate emissions from light-duty ...
A gasoline direct injection engine was set-up to operate with a dynamometer in a test cell. Test cyc...
Increasing concern on health related effects related due to inhalation of diesel particulates has le...
Air pollution caused by diesel engine emissions, especially particulate matters and nitric oxides em...
This report presents the work on the development of a new technique capable of measuring the particu...
A primary means to reduce environmental levels of diesel particulate matter (DPM) exposure to miners...
This paper reports our efforts to develop an instrument, TG-1, to measure particulate emissions from...
The new BS-VI norms which will bring down the NOx, HC & PM values for diesel and petrol engines.For ...
A diesel particulate matter analyzer capable of direct, real-time measurement of engine exhaust part...
Diesel engine emissions are highly complex mixtures. They consist of a wide range of organic and ino...
The objective of this study is to discern and characterize the factors contributing to the variabili...
Using a sampling method of particulate matter (PM) without the use of a dilution tunnel allows for e...
Diesel and gasoline engines face tightening particulate matter emissions regulations due to the envi...
Portable Emissions Measurement Systems (PEMS) are becoming part of the emissions control regulations...
The U.S. Bureau of Mines and others have conducted a number of occupational exposure surveys since t...
The objective of this project was to measure and characterize particulate emissions from light-duty ...
A gasoline direct injection engine was set-up to operate with a dynamometer in a test cell. Test cyc...